Epson manual Installation and Positioning of TM-U230, Selecting a Place of Installation

Page 9

Confidential

Chapter 1

Installation

TM-U230 Developer’s Guide

Installation and Positioning of TM-U230

Precautions in Handling the Fine Coating Case (only for Fine Coating Case model)

This printer is housed in a plastic case (*) with a fine coating; simple cleaning is enough to enable dirt to come off easily so that the exterior of the printer remains in good condition. Like plastic cases, handle the fine coating with care as described below.

(*)Fine coating is not applied to the installation surface of the metal plate, the power supply box and the inside of the case.

•Do not scratch the surface with hard objects; otherwise the case may become damaged and dirt may become difficult to remove.

•Do not use any type of abrasive agent (glass, metal, ceramic, etc.) to clean the case; otherwise the surface of the case may become damaged and dirt may become difficult to remove.

•Never clean the case with disinfectant, bleach, alcohol, benzene, thinner, chlorine, or ketone; otherwise the dirt may become difficult to remove. Also, they may cause the case to become discolored, dissolved, or deformed.

•Label may come off of the fine coating of the case.

Selecting a Place of Installation

This printer can be installed vertically (standard installation) so that the paper exit faces the front or horizontally so that the paper exit faces upwards. With the optional wall mounting bracket (Model No: WH-10) the printer can be wall-mounted.

Note:

Since vibrations are generated during paper cutting, take suitable measures to secure the printer.

❏Installation on a table (vertical or horizontal installation)

•Regardless of installation method chosen, the tilt of surface selected must be 15° or less.

•Attach the supplied switch panel sheet for horizontal installation when the printer is to be installed horizontally.

•Adjust the N.E detector and attach the rubber feet as required by the chosen method of installation.

Environment Specifications

See the Environment Specifications section in Appendix A.

Installation 1-1

Image 9

Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Safety Precautions Key to SymbolsConfidential Moduler Connector About This GuideRelated Software and Documents Developer’s Guide Appendix a Specifications Installation and Positioning of TM-U230 Selecting a Place of InstallationEnvironment Specifications External Dimensions Dip Switch Settings Serial Interface DIP SwitchParallel Interface Ethernet Interface Changing the Location of the Rubber Feet Settings for Horizontal InstallationChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Wall Mounting InstallationSecure the mount to the wall using all the 10 screw holes Installing the wall mountAttaching the hangers Connecting a Host PC Attaching the printer to the wallSerial interface connections Connecting to a USB interface Connecting to a parallel interfaceConnecting to an Ethernet interface Names of parts Ethernet test switchInterface cable connections Ethernet LEDsDrawer Kick-Out Connector Marked DK 22Installation Handling Important Safety InformationWaterproof Second Digit Ability to keep water out Waterproof mechanism Cutting roll paper Replacing roll paperPrinter is offline as long as the LED is flashing 6Handling Autocutter lock lever Replacing the ribbon cassette8Handling Paper jams in the vicinity of the print head Removing paper jams10Handling Be sure to properly secure the cover with the screw 11 Normal auto cutter position Paper jam in the auto cutter12 Installing the power button cover Installing the power button cover14Handling Internal Buzzer Paper roll end settings2Compatibility Receive Buffer 254, 255 Space Mounted MechanismGS V Function B Saving Space for Receipt PrintingGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Character Specifications Printing SpecificationsAutocutter Specifications Paper SpecificationsElectrical Specifications Environmental SpecificationsPrinting Area Appendix A-4Specifications External Appearance Figure A-4 Without the power supply coverAppendix A-6Specifications Specifications Appendix A-7 Drawer Kick-out Connector Drawer Kick-out SpecificationsLimitations Drawer Circuitry Pin AssignmentAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation