Epson U230 manual 10Handling

Page 40

Confidential

Figure 2-9 Removing jammed paper

CAUTION:

Do not remove jammed paper by pulling it against paper feed direction.

6.Take the ribbon cassette out of the printer.

7.Loosen the screw that secures the print head cover. Loosen the screw until it tilts.

8.Remove the print head cover.

CAUTION:

The print head becomes hot during printing. Perform this procedure when the print head has become cool.

2-10Handling

Image 40

Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Key to Symbols Safety PrecautionsConfidential About This Guide Moduler ConnectorRelated Software and Documents Developer’s Guide Appendix a Specifications Selecting a Place of Installation Installation and Positioning of TM-U230Environment Specifications External Dimensions Dip Switch Settings DIP Switch Serial InterfaceParallel Interface Ethernet Interface Settings for Horizontal Installation Changing the Location of the Rubber FeetChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Installation Wall MountingInstalling the wall mount Secure the mount to the wall using all the 10 screw holesAttaching the hangers Attaching the printer to the wall Connecting a Host PCSerial interface connections Connecting to a parallel interface Connecting to a USB interfaceConnecting to an Ethernet interface Ethernet test switch Names of partsEthernet LEDs Interface cable connectionsDrawer Kick-Out Connector Marked DK 22Installation Important Safety Information HandlingWaterproof Second Digit Ability to keep water out Waterproof mechanism Replacing roll paper Cutting roll paperPrinter is offline as long as the LED is flashing 6Handling Replacing the ribbon cassette Autocutter lock lever8Handling Removing paper jams Paper jams in the vicinity of the print head10Handling Be sure to properly secure the cover with the screw Paper jam in the auto cutter 11 Normal auto cutter positionInstalling the power button cover 12 Installing the power button cover14Handling Paper roll end settings Internal Buzzer2Compatibility Receive Buffer Mounted Mechanism 254, 255 SpaceSaving Space for Receipt Printing GS V Function BGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Printing Specifications Character SpecificationsPaper Specifications Autocutter SpecificationsEnvironmental Specifications Electrical SpecificationsPrinting Area Appendix A-4Specifications Figure A-4 Without the power supply cover External AppearanceAppendix A-6Specifications Specifications Appendix A-7 Drawer Kick-out Specifications Drawer Kick-out ConnectorLimitations Pin Assignment Drawer CircuitryAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation