Epson U230 manual Paper Specifications, Autocutter Specifications

Confidential

[cpl: characters per line]

[lps: lines per second]

Note:

The dot spacing between characters for 3-half dot and 2 half-dot can be set by changing the DIP switch setting.

1.24	1.587
0.159
0.353
2.4.	3.1
	[Units: mm]

			Figure A-1 7 ⋅ 9 font
Paper Specifications
	Item	Specification
	Paper feed method	Friction feed
	Paper feed interval	Initial setting: approximately 0.176 mm {1/6”}
		Can be set in units of approximately 0.176 mm {1/144”} by a command
	Paper feed speed	Approximately 4.17 inches/second (25 lps) (continuous printing)
		(lps: lines per second)
	Paper dimensions	Paper roll		Width: 76 ± 0.5 {3” ± 0.02”}
				Maximum diameter: 83 mm
				Core: when there is no near end sensor, always be sure to use a
				paper roll htat is not glued to the core
				Normal paper:
				Paper thickness: 1 sheet 0.06 to 0.085 mm
				Mass: 52.3 to 64 g/m2 {14 to 17lb} (45 to 55 kg/1000 sheets/
				1091⋅788 mm}

Autocutter Specifications

Partial cut is executed by command.

Partial cut: cutting with one point left uncut

Appendix A-2Specifications