Epson U230 manual Confidential

Page 5

Confidential

TM-U230 Developer’s Guide

 

•Do not modify the power cord.

•Do not place heavy objects on the power cord.

•Do not bend, twist, or pull the power cord excessively.

•Do not route the power cord near heaters.

•Remove any dirt or dust from the power plug before plugging it in.

•Be sure to fully insert the power plug.

CAUTION:

❏All cables are to be connected only as described in the manual. Incorrect connection could cause damage or a fire hazard.

❏Be sure to set this product on a firm, stable, horizontal surface. The product may break or cause injury if it falls.

❏Do not install the printer in extremely humid or dusty locations. Operation under such conditions could damage the printer or cause a fire or shock hazard.

❏Do not stand on the printer or place heavy objects on it. The printer could fall or collapse, causing breakage and possible injury.

❏For added protection of the printer, disconnect the power plug from the wall outlet when the printer is not to be used for an extended period of time.

❏Be sure not to touch the print head or motors when you remove paper jammed in the printer. Wait until the print head and motors have cooled down before removing jammed paper. When the printer has been used for an extended period, the print head and the motors are very hot and could cause burns.

Precautions in handling the fine coating of the case (only for fine coating case model)

A fine coating is used for the external surface of the plastic case of the printer, which makes wiping and removing kitchen stains easy; however, you should note the following when cleaning the surface in order to preserve the quality of the coating (the metal plate and the inside of the case do not have the fine coating):

❏Do not scrub the surface with a hard object. Otherwise, the case will be scratched and harder to clean.

❏Do not use a cleanser that includes polishing materials such as grains of glass, metal, or ceramics. Otherwise, the case will be scratched and harder to clean.

❏Never use disinfectant, bleach, alcohol, benzine, thinner, chlorine solvent, or ketone solvent. Otherwise, the case will be harder to clean, and the case may be seriously harmed or even deformed and its color may be changed.

❏The label may come off of the fine coating of the case if harsh cleaning methods are used.

iii

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Safety Precautions Key to SymbolsConfidential Related Software and Documents Moduler ConnectorAbout This Guide Developer’s Guide Appendix a Specifications Environment Specifications Installation and Positioning of TM-U230Selecting a Place of Installation External Dimensions Dip Switch Settings Serial Interface DIP SwitchParallel Interface Ethernet Interface Changing the Location of the Rubber Feet Settings for Horizontal InstallationChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Wall Mounting InstallationSecure the mount to the wall using all the 10 screw holes Installing the wall mountAttaching the hangers Serial interface connections Connecting a Host PCAttaching the printer to the wall Connecting to a USB interface Connecting to a parallel interfaceConnecting to an Ethernet interface Names of parts Ethernet test switchInterface cable connections Ethernet LEDsDrawer Kick-Out Connector Marked DK 22Installation Handling Important Safety InformationWaterproof Second Digit Ability to keep water out Waterproof mechanism Cutting roll paper Replacing roll paperPrinter is offline as long as the LED is flashing 6Handling Autocutter lock lever Replacing the ribbon cassette8Handling Paper jams in the vicinity of the print head Removing paper jams10Handling Be sure to properly secure the cover with the screw 11 Normal auto cutter position Paper jam in the auto cutter12 Installing the power button cover Installing the power button cover14Handling Internal Buzzer Paper roll end settings2Compatibility Receive Buffer 254, 255 Space Mounted MechanismGS V Function B Saving Space for Receipt PrintingGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Character Specifications Printing SpecificationsAutocutter Specifications Paper SpecificationsPrinting Area Electrical SpecificationsEnvironmental Specifications Appendix A-4Specifications External Appearance Figure A-4 Without the power supply coverAppendix A-6Specifications Specifications Appendix A-7 Limitations Drawer Kick-out ConnectorDrawer Kick-out Specifications Drawer Circuitry Pin AssignmentAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation
Top Page Image Contents