Epson U230 manual Attaching the hangers

Page 23

Confidential	TM-U230 Developer’s Guide

Attaching the hangers

Note:

❏There are holes for 4 screws in the hangers (The number of the type of screw to be used is stamped on the hanger). Use the correct screw holes.

❏In attaching the hangers to the printer, use the 4 screws supplied with the WH-10 wall mounting bracket.

1.Place the hangers on the printer (one at the center and the other at the bottom of the printer).

2.Use the screw holes in the printer marked "2" for the top hanger. Secure the hanger using two of the supplied screws.

3.Use the screw holes in the printer marked "1" for the bottom hanger. Secure the hanger using two of the supplied screws.

					The two screw holes
					labeled "2"
Hanger
Hanger
The two screw holes
The two screw holes
labeled "1"						Hanger

Attaching the hanger

CAUTION:

Make sure that all 4 screws are properly secured.

Installation 1-15

Image 23

Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Safety Precautions Key to SymbolsConfidential Related Software and Documents Moduler ConnectorAbout This Guide Developer’s Guide Appendix a Specifications Environment Specifications Installation and Positioning of TM-U230Selecting a Place of Installation External Dimensions Dip Switch Settings Serial Interface DIP SwitchParallel Interface Ethernet Interface Changing the Location of the Rubber Feet Settings for Horizontal InstallationChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Wall Mounting InstallationSecure the mount to the wall using all the 10 screw holes Installing the wall mountAttaching the hangers Serial interface connections Connecting a Host PCAttaching the printer to the wall Connecting to a USB interface Connecting to a parallel interfaceConnecting to an Ethernet interface Names of parts Ethernet test switchInterface cable connections Ethernet LEDsDrawer Kick-Out Connector Marked DK 22Installation Handling Important Safety InformationWaterproof Second Digit Ability to keep water out Waterproof mechanism Cutting roll paper Replacing roll paperPrinter is offline as long as the LED is flashing 6Handling Autocutter lock lever Replacing the ribbon cassette8Handling Paper jams in the vicinity of the print head Removing paper jams10Handling Be sure to properly secure the cover with the screw 11 Normal auto cutter position Paper jam in the auto cutter12 Installing the power button cover Installing the power button cover14Handling Internal Buzzer Paper roll end settings2Compatibility Receive Buffer 254, 255 Space Mounted MechanismGS V Function B Saving Space for Receipt PrintingGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Character Specifications Printing SpecificationsAutocutter Specifications Paper SpecificationsPrinting Area Electrical SpecificationsEnvironmental Specifications Appendix A-4Specifications External Appearance Figure A-4 Without the power supply coverAppendix A-6Specifications Specifications Appendix A-7 Limitations Drawer Kick-out ConnectorDrawer Kick-out Specifications Drawer Circuitry Pin AssignmentAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation