Epson U230 manual Mounted Mechanism, 254, 255 Space

Page 48

Confidential

For the TM-U210 series printers, when DIP switch 1-2 is off, the following commands cannot be used; however the TM-U230 can use them.

Printer	Name

HT	Horizontal tab

ESC %	Select/cancel user-defined character set

ESC &	Define user-defined characters

ESC ?	Cancel user-defined characters

ESC D	Set horizontal tab positions

FS 2	Define user-defined Kanji characters (only for Multilingual specification)

FS ?	Cancel user-defined Kanji characters (only for Multilingual specification)

Receive buffer full conditions are different.

Printer	Receive buffer-full conditions

TM-U230	When the remaining memory size becomes 128 bytes, the printer will be BUSY
	and when it returns to 256 bytes, the BUSY condition will be canceled.

TM-U210 series	When the remaining memory size becomes 16 bytes, the printer will be BUSY
	and when it returns to 26 bytes, the BUSY condition will be canceled.

Mounted Mechanism

Printer	Mounted Mechanism

TM-U230	Autocutter and near-end sensor are standard equipment
	Has no paper roll take-up device

TM-U210 series	Near-end sensor is an option
	Available with or without an autocutter
	Available with or without a paper roll take-up device

Page 254, 255 (Space Page)

There is difference in a memory mapping.

Printer	Memory Mapping

TM-U230	Page 254	7 ⋅ 9 font	First address ECBA0

		9 ⋅ 9 font	First address ED5A0

	Page 255	7 ⋅ 9 font	First address EE1A0

		9 ⋅ 9 font	First address EEBA0

TM-U210 series	Page 254	7 ⋅ 9 font	First address 8CBA0

		9 ⋅ 9 font	First address 8D5A0

	Page 255	7 ⋅ 9 font	First address 8E1A0

		9 ⋅ 9 font	First address 8EBA0

3-4Compatibility

Image 48

Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Key to Symbols Safety PrecautionsConfidential Moduler Connector About This GuideRelated Software and Documents Developer’s Guide Appendix a Specifications Installation and Positioning of TM-U230 Selecting a Place of InstallationEnvironment Specifications External Dimensions Dip Switch Settings DIP Switch Serial InterfaceParallel Interface Ethernet Interface Settings for Horizontal Installation Changing the Location of the Rubber FeetChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Installation Wall MountingInstalling the wall mount Secure the mount to the wall using all the 10 screw holesAttaching the hangers Connecting a Host PC Attaching the printer to the wallSerial interface connections Connecting to a parallel interface Connecting to a USB interfaceConnecting to an Ethernet interface Ethernet test switch Names of partsEthernet LEDs Interface cable connectionsDrawer Kick-Out Connector Marked DK 22Installation Important Safety Information HandlingWaterproof Second Digit Ability to keep water out Waterproof mechanism Replacing roll paper Cutting roll paperPrinter is offline as long as the LED is flashing 6Handling Replacing the ribbon cassette Autocutter lock lever8Handling Removing paper jams Paper jams in the vicinity of the print head10Handling Be sure to properly secure the cover with the screw Paper jam in the auto cutter 11 Normal auto cutter positionInstalling the power button cover 12 Installing the power button cover14Handling Paper roll end settings Internal Buzzer2Compatibility Receive Buffer Mounted Mechanism 254, 255 SpaceSaving Space for Receipt Printing GS V Function BGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Printing Specifications Character SpecificationsPaper Specifications Autocutter SpecificationsElectrical Specifications Environmental SpecificationsPrinting Area Appendix A-4Specifications Figure A-4 Without the power supply cover External AppearanceAppendix A-6Specifications Specifications Appendix A-7 Drawer Kick-out Connector Drawer Kick-out SpecificationsLimitations Pin Assignment Drawer CircuitryAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation