![](/images/new-backgrounds/1203718/203718113x1.webp)
Cleaning the Print Head Using the Operator Panel
If you want to clean the print head from the operator panel, follow these steps:
1
Make sure
the printer is
on.
Make sure the green POWER light is on.
2
Press and hold the
RESUME button for at least two seconds until the printer beeps twice.
The POWER light will blink for several seconds while the print head is being cleaned
Perform the print head cleaning only when you encounter a print quality problem. Unnecessary and repetitious cleaning will waste ink. If you execute the print head cleaning while paper is manually loaded, the printer will eject the paper and then perform the cleaning.