Brady 2034, 2024 manual Basic Function Ribbon Saver

Basic Function

BASIC FUNCTION PRINT METHOD

DIRECT*

TRANSFER

BASIC FUNCTION SELECT TOF

GAP*

REFLECTIVE

CONTINUOUS

BASIC FUNCTION DARKNESS

Values 1-64

BASIC FUNCTION COMM SETUP

*PORTA 9600

8 N 1 BOTH

BASIC FUNCTION LABEL PRESET

ENABLE

DISABLE*

BASIC FUNCTION CUTTER

ENABLE

DISABLE*

BASIC FUNCTION RIBBON SAVER

ENABLE

DISABLE*

•Selects the type of printing desired

•Selects direct thermal printing (no ribbon installed)

•Selects thermal transfer printing (ribbon installed)

•Top Of Form

•Default − looks for gap between labels

•Senses black stripe on back side on media

•No Top Of Form sensing

•Used to balance a new Printhead's level of darkness

•1 indicates the lightest and 64 indicates darkest setting

•Sets the parameters for the communication port

•Communications port and Baud rate, Word length, Parity, Stop Bits, Protocol.

Word lengths = 7, 8

Parity	= None, Even, Odd
Stop Bits	=	1, 2
Protocols	=	BOTH, DTR, XON/XOFF
Baud rates	= 300, 600, 1200, 2400, 4800, 9600,
		19200

•Selects the Peel and Present Option

•Selects the Present Sensor

•No Present Sensor selected

•Controls Cutter Option, if installed

•Cutter Option installed or selected

•No Cutter Option installed or used

•Controls Ribbon Saver Option, if installed

•Ribbon Saver selected (stops ribbon from advancing during voids of .95 inches or larger)

•Ribbon Saver not installed or selected

* represents default settings

_______________________________________________________________________

Using Your Printer 29