LCD Display |
| Alarm Description |
CUTTER FAULT | The cutter operation failed | |
| Possible causes: | |
| ∙ | Cutter not installed |
| ∙ | Jam in cutter |
| ∙ | Defective cutter hardware, call for service. |
| Warning: | |
| Turn OFF the Printer and remove the AC power | |
| cord before attempting to remove any jam or | |
| obstruction from the cutter. | |
|
| |
RIB SAVER FAULT | The Ribbon Saver operation failed | |
| Possible causes: | |
| ∙ | Obstruction in ribbon area |
| ∙ | Ribbon Saver Option is not installed |
| ∙ | Defective ribbon saver hardware, call for |
|
| service. |
CUTTER NotEQP | The Cutter Option is enabled and the cutter is not | |
| present | |
RIBSVR NotEQP | The Ribbon Saver Option is enabled and the | |
| ribbon saver is not present | |
5.3Mechanical Adjustments
The following mechanical adjustments should be performed only when required, additional sections that follow provide detailed descriptions for each adjustment.
·Media Width adjustment, (see Section 5.3.1).
·Media sensor adjustment, (see Section 5.3.2).
·Printhead Replacement, (see Section 5.3.3).
_____________________________________________________________________________________________________
Maintenance and Adjustments | 57 |