Temp − this reading is the feedback voltage of the printhead thermistor. At power up or in an idle condition, this value should be in the range of 060 to 065. A reading of 175 is high and could
decrease the life of the printhead. An average amount of printing will give readings that range from 070 to 120.
Pot − this reading comes from the darkness potentiometer located on the front panel board. It will vary from 000 (darkest) to 255 (lightest). Adjust this value for a midrange value of 128.
TOFA − (Top of Form Adjustment) determines where the first position of print begins on the label.
RIBN − this value indicates the operation of the ribbon mechanism, this value will vary.
RWND − this value indicates the operation of the internal rewind mechanism, this value will vary.
Counter Information − is the values and dates of the absolute and resettable counters.
Memory Configuration − lists the current size of the 'Internal Module' RAM in 4K byte blocks, and the 'Scalable Fonts' current cache setup for scalable font calculations.
_______________________________________________________________________
Using Your Printer | 37 |