Brady 2034, 2024 manual System Level Commands, Char Description Format

The System Level Commands are used to create formats, load and store graphic information, and control the Printer. Table 4-3 provides a brief description and format of each System Level Command character.

Char	Description			Format
A	Set time and date	FORMAT: AwmmddyyyyhhMMjjj
		16 digits total
		w	=	1 digit week, 1 is Monday
		mm	=	2 digits for month
		dd	=	2 digits for day
		yyyy	=	4 digits for year
		hh	=	2 digits for hour (24 hr ft)
		MM	=	2 digits for minutes
		jjj	=	3 digits for Julian I.D. value
a	Enable feedback characters	Returns decimal 30 after each label and
		31 after each batch of labels
B	Get Printer time and date information	Print time and date to port
c	Set continuous paper length	nnnn= length of paper to feed per label
d	Set Printer to double buffer mode	Use to print a label while a second is
		formatting in memory
E	Set quantity for stored label	Ennnn = Set quantity for stored label
e	Select edge sensor	For "see through" media sensing, etc.
F	Form feed	Feeds one label at a time
f	Set form stop position (BACKFEED)	fnnn
		nnn = 3 digits from sensor
	Distance to peel off or present
	position
G	Print last label format
I	Input graphics data block	A bank designation, an optional word
	See the Programmer's Manual for	length modifier, a format designation,
	format	and up to a 16-character string to
		identify the stored image data
i	Download scalable font
J	Set pause for each label
K	Extended System Commands	Kn	n = Q - for query
	Refer to the Programmer's Manual for			M - Set configuration
				S - Scalable font cache
	proper format			W - Label width
	n = M,S, or W for set memory config.			R - Reset memory config.
				f - Set form stop position
	<STX>KMxxxx:Syyyy:Wzzzz
		<STX>Kfxxxx defines distance between
		the Printhead and stop position
	Table 4-3 System Level Commands

_____________________________________________________________________________________________________

Printing Labels 43