Outback Power Systems FW-SP-250, FW-SP-ACA Figures 12 FW-SP-R and FW-ACA Bracket, FW-SP-R LEDs

Page 14

The locating pin on the FW-ACA bracket fi ts in this slot

FW-SP-R LEDs

(4) Pass the FW-SP-R wires through the FW- ACA Bracket opening, lining up the locating pin with the slot on the surge protector.

Figures 12: FW-SP-R and FW-ACA Bracket

13

Image 14

Contents Includes Mounting and Installation Surge ProtectorContact Information About OutBack Power SystemsDisclaimer Warranty Introduction Dear OutBack CustomerOutback FLEXware Surge Protector ModelsIntroduction LEDs Electrical Connections and LED IndicatorsFLEXware Surge Protector Specifications MountingRemoving and installing FX M5 hex bolts Tools Required to Install PurposeProcedure Underside screw secures FW-SP-ACA to FXRemove these Two M5 hex bolts from the FX Removing various covers from the FXPreparing and installing the FW-SP-ACA onto an FX FW-SP-ACA slides onto the FXFW-SP-ACA slides down FX slots Screws included secure the FW-SP-ACA to an FXFW-SP-250 FW-SP-250FW250 to check the placement of wires and components FW-ACA housing Locating pin FW-SP-R Replacement for the FW-SP-ACA or the FW-ACAProcedure Figures 12 FW-SP-R and FW-ACA Bracket FW-SP-R LEDsFW-SP-R installed inside the FW-ACA LED labelFW-SP-R Replacement for the FW-SP-250 Securing wires to FX DC terminalsWiring and Connecting the FLEXware Surge Protector FLEXware Surge Protector Wiring DesignationsSystem can now be powered up FLEXware Surge Protector Limited Warranty Revision System Owner Surge Protector Limited Warranty RegistrationArlington, WA 19009 62nd Avenue NE +34