Outback Power Systems FW-SP-250, FW-SP-R manual FW-SP-ACA slides onto the FX

Page 9

(6)Remove the cover from the FW-SP-ACA (secured with two Phillips screws)

(8)Remove any AC wires from the FX AC Wiring Block by loosening the slotted screws. These wires will be installed through the FW-SP-ACA.

(7)Remove the appropriate knockouts for the individual power application. Note that knockouts should be scored first with a utility knife and then removed. The dual, concentric knockout on the back offers openings for the FW500, FW1000, PS2 and PS4 AC enclosures.

(9)The FW-SP-ACA slides onto the FX in

the same location as the now removed AC Conduit Plate and secures to the FX with its own factory-supplied screws in the same location as the removed M5 hex bolts.

Figure 6: Preparing and installing the FW-SP-ACA onto an FX

8

Image 9

Contents Surge Protector Includes Mounting and InstallationAbout OutBack Power Systems DisclaimerContact Information Dear OutBack Customer Warranty IntroductionModels Outback FLEXware Surge ProtectorIntroduction FLEXware Surge Protector Specifications Electrical Connections and LED IndicatorsLEDs MountingProcedure Tools Required to Install PurposeRemoving and installing FX M5 hex bolts Underside screw secures FW-SP-ACA to FXRemoving various covers from the FX Remove these Two M5 hex bolts from the FXFW-SP-ACA slides onto the FX Preparing and installing the FW-SP-ACA onto an FXScrews included secure the FW-SP-ACA to an FX FW-SP-ACA slides down FX slotsFW-SP-250 FW-SP-250FW250 to check the placement of wires and components FW-SP-R Replacement for the FW-SP-ACA or the FW-ACA ProcedureFW-ACA housing Locating pin FW-SP-R LEDs Figures 12 FW-SP-R and FW-ACA BracketLED label FW-SP-R installed inside the FW-ACASecuring wires to FX DC terminals FW-SP-R Replacement for the FW-SP-250FLEXware Surge Protector Wiring Designations Wiring and Connecting the FLEXware Surge ProtectorSystem can now be powered up FLEXware Surge Protector Limited Warranty Revision Surge Protector Limited Warranty Registration Arlington, WASystem Owner +34 19009 62nd Avenue NE