FW-SP-ACA
The
FX Series Inverter/Charger.
Underside screw secures
FW-SP-ACA to FX
Phillips screw secures
surge protector board to the
LEDs
Underside screw secures
Figure 4: FLEXware Surge Protector-ACA
Tools Required to Install: | Purpose: | |
• | Slotted screwdriver | • Wiring to the AC wiring block |
• | Phillips screwdriver | • Remove and install covers |
• 13 mm socket (torque ratchet) | • Securing wires to FX DC terminals | |
• | Utility knife | • Removing plastic knockouts |
• 4 mm Allen wrench | • Removing and installing FX M5 hex bolts |
Procedure
Turn off the system’s DC, AC IN, and AC OUT breakers (if available, use BYPASS mode to power any loads).
6