Outback Power Systems FW-SP-ACA, FW-SP-250, FW-SP-R manual FLEXware Surge Protector Limited Warranty

Page 19

FLEXwareSurge Protector Limited Warranty

OutBack Power Systems, Inc. (“OutBack”) provides a limited warranty (“Warranty”) against defects in materials and workmanship for its FLEXware Surge Protector Products (“Product”) if installed for use with OutBack FX Series Inverter/Chargers in fi xed location applications. The effective time period of this Warranty is determined by the length of the warranty for the FX series Inverter/Charger installed for use with the Product.

For this Warranty to be valid, the Product purchaser must complete and submit the applicable Product registration card within ninety (90) days of the eligible Product’s fi rst retail sale and OutBack must acknowledge receipt of the registration card through the issuance of an OutBack Warranty Certifi cate. This Warranty applies to the original OutBack Product purchaser and is transferable only if the Product remains installed in the original use location with the original OutBack FX Series Inverter/Charger. This Warranty does not apply to any Product or Product part that has been modifi ed or damaged by the following:

Installation or Removal;

Alteration or Disassembly;

Normal Wear and Tear;

Accident or Abuse;

Corrosion;

Lightning;

Repair or service provided by an unauthorized repair facility;

Operation contrary to manufacturer product instructions;

Fire, Floods or Acts of God;

Shipping or Transportation;

Incidental or consequential damage caused by other components of the power system;

Any product whose serial number has been altered, defaced or removed; or

Any other event not foreseeable by OutBack.

OutBack’s liability for any defective Product, or any Product part, shall be limited to the repair or replacement of the Product at OutBack’s discretion. OutBack does not warrant or guarantee workmanship performed by any person or fi rm installing the Products. This Warranty does not cover the costs of installation, removal, shipping (except as described below), or reinstallation of the Products.

To request warranty service, you must contact OutBack Technical Services at (360) 435-6030 or support@outbackpower.com within the effective warranty period. If warranty service is required, OutBack will issue a Return Material Authorization (RMA) number. A request for an RMA number requires all of the following information:

Revision 2007-06-20

18

Image 19
Contents Surge Protector Includes Mounting and InstallationDisclaimer About OutBack Power SystemsContact Information Dear OutBack Customer Warranty IntroductionModels Outback FLEXware Surge ProtectorIntroduction Mounting Electrical Connections and LED IndicatorsFLEXware Surge Protector Specifications LEDsUnderside screw secures FW-SP-ACA to FX Tools Required to Install PurposeProcedure Removing and installing FX M5 hex boltsRemoving various covers from the FX Remove these Two M5 hex bolts from the FXFW-SP-ACA slides onto the FX Preparing and installing the FW-SP-ACA onto an FXScrews included secure the FW-SP-ACA to an FX FW-SP-ACA slides down FX slotsFW-SP-250 FW-SP-250FW250 to check the placement of wires and components Procedure FW-SP-R Replacement for the FW-SP-ACA or the FW-ACAFW-ACA housing Locating pin FW-SP-R LEDs Figures 12 FW-SP-R and FW-ACA BracketLED label FW-SP-R installed inside the FW-ACASecuring wires to FX DC terminals FW-SP-R Replacement for the FW-SP-250FLEXware Surge Protector Wiring Designations Wiring and Connecting the FLEXware Surge ProtectorSystem can now be powered up FLEXware Surge Protector Limited Warranty Revision Arlington, WA Surge Protector Limited Warranty RegistrationSystem Owner +34 19009 62nd Avenue NE