Wacom DTK-2400 user manual Mouse mode

ContentsIndex

62

FUNCTION NAME	DESCRIPTION
MODE TOGGLE...	Toggles between pen mode and mouse mode. When using Cintiq on a multiple
	monitor system, this enables you to use your pen to control the other monitors in
	mouse mode.
	When first setting a pen button to MODE TOGGLE..., the MOUSE MODE dialog box is
	displayed where you can adjust the mouse acceleration and speed.
	Sets the screen cursor tracking
	speed when in mouse mode.
	Sets the screen cursor acceleration
	when in mouse mode.

	Mouse mode settings can be accessed from a number of different locations within
	the control panel. However, only one MOUSE ACCELERATION and SPEED setting can
	be made for each pen and application that you are customizing.
	The mouse mode settings are independent of system settings. Changes you make
	to these settings in the Wacom Tablet control panel do not affect similar system
	settings. However, changes made to similar system settings may affect your pen
	display settings.
ERASE	Pen only. Sets a button so that when the button is pressed, the pen tip will act like
	the eraser in applications that support the ERASE function. Default setting for the
	eraser. See erasing.
SHOW SETTINGS	Activates (on your display screen) a diagram of the current ExpressKey, Touch
	Ring, and pen settings. The current functions for each control are shown.
	At the bottom of the diagram, click CHANGE SETTINGS... to open the Wacom Tablet
	control panel and adjust settings as needed.
	Dismiss the diagram by again pressing the ExpressKey to which this function is
	assigned, or by clicking anywhere outside of the diagram.

ContentsIndex

62