ContentsIndex
98
USING AN ALTERNATE MOUNT OR STAND
If using Cintiq in an installation that requires the use of an alternate mounting platform, you can remove the Cintiq display stand from the unit and mount the pen display onto any stand or mounting platform conforming to the VESA
Notes:
Required mounting screws are 4 mm wide with a 0.7 mm pitch (M4), with a screw clearance depth of 17 mm. Exceeding the clearance depth of 17 mm will damage the internal components of the pen display. These screws were provided with your product accessories.
The combined weight of this product (pen display and display stand) is approximately 29 kg (64 lbs). Any table or platform on which this product is installed must be able to support the combined weight of the Cintiq interactive pen display and Cintiq display stand.
The pen display portion of this product weighs 16 kg (35.2 lbs). Any platform or fixture on which the pen display alone is mounted must be able to support the weight of the Cintiq interactive pen display.
To remove the pen display from the display stand:
1.Turn off your computer and power off the pen display.
2.See removing Cintiq from the display stand.
To attach the pen display to a VESA mount:
1.Review the instructions that came with your stand or mounting platform. Be sure you understand them, and follow all instructions carefully. Pay attention to any cautions or other safety information.
2.Locate the provided VESA mount spacers to match the lower three screw positions on the back of Cintiq.
3.Using the appropriate screws for your mounting platform and as indicated above, firmly attach the pen display to the platform.
4.As applicable, attach the appropriate cabling between the pen display and your computer. Be sure to replace the pen display cable connector covers.
To remove the pen display from a VESA stand, reverse the above procedure. Then see mounting Cintiq on the display stand.
Warning
Spacers
When attaching the pen display onto an alternate mounting platform, be sure to follow all instructions in the documentation supplied by the platform manufacturer. If improperly installed, the unit could fall, resulting in physical injury or damage to the unit.
ContentsIndex
98