Toshiba KD-1025 manual Lower transport roller

[B]Lower transport roller

(1)Take off the rear cover. P.4-2 "[D] Rear cover"

(2)Loosen 1 screw fixing the tensioner bracket.

Fig. 4-15

(3)Remove the belt.

4

Note:

When installing the belt, be sure to confirm the gap between the belts with the following procedure.

1.Install the belt in KD-1025.

2.Tighten 1 fixing screw of the tensioner bracket.

3.Confirm that the gap between the belts is approx. 3 mm.

Fig. 4-16

Approx.3mm

Fixing screw

Fig. 4-17

© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved	KD-1025
	DISASSEMBLY AND REPLACEMENT

4 - 7