Toshiba KD-1025 manual PFP motor assembly

(7)Remove 2 screws and take off the tray-up

motor from the bracket. Tray-up motor

[C]PFP motor

(1)Take off the rear cover. P.4-2 "[D] Rear cover"

(2)Disconnect 1 connector.

(3)Remove 4 screws and take off the PFP motor.

4

Fig. 4-33

Connector

PFP motor

Fig. 4-34

[D]PFP motor assembly

(1)Take off the rear cover. P.4-2 "[D] Rear cover"

(2)Loosen 1 screw fixing the tensioner bracket.

Fig. 4-35

© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved	KD-1025
	DISASSEMBLY AND REPLACEMENT

4 - 13