(3)Release the latches and take off the switch.
(4)Disconnect the connector.
Side cover open/close switch |
Latches |
Fig. |
[E] Upper/lower drawer detection switches (S8/S9)
(1)Take out the drawer.
(2)Take off the rear cover.
(3)Take off the PFP motor assembly.
(4)Disconnect the connectors connected to the drawer detection switch.
(5)Release the latches and remove the switch from the front side.
Drawer detection switch
Fig.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved | |
DISASSEMBLY AND REPLACEMENT |
|
4 - 20