Toshiba EO1-33088 A1.3.1 Media Type Cont, A1.3.2 Detection Area of the Transmissive Sensor

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33088

A1.3 Media

A1.3.1 Media Type (Cont.)

								Unit: mm (inch)
	Issue mode		Batch mode				Strip mode	Cut mode
Item
c Width including backing paper							25.4 to 112 (1.0 to 4.41)
d Media width					22.4 to 109 (0.88 to 4.29)
		203 dpi	10 to 999				25.4 to 152.4	25.4 to 999
	Label		(0.39 to 39.3)				(1.0 to 6)	(1.0 to 39.3)
		300 dpi	10 to 457.2				25.4 to 152.4	25.4 to 457.2
e Media pitch			(0.39 to 18.0)				(1.0 to 6)	(1.0 to 18.0)
		203 dpi	10 to 999			-----		25.4 to 999
	Tag		(0.39 to 39.3)					(1.0 to 39.3)
		300 dpi	10 to 457.2			-----		25.4 to 457.2
			(0.39 to 18.0)					(1.0 to 18.0)
		203 dpi	8 to 997				23.4 to 150.4	19.4 to 993
f Media length			(0.31 to 39.25)				(0.92 to 5.92)	(1.0 to 39.1)
		300 dpi	8 to 455.2 (0.31 to 17.9)				23.4 to 150.4	19.4 to 451.2
							(0.92 to 5.92)	(1.0 to 17.76)
g Gap/ Black mark length			2.0 to 10.0 (0.08 to 0.39)					6.0 to 10.0
								(0.24 to 0.39)
h Black mark width							Min. 8.0 (0.31)
Thickness				0.06 to 0.19 (0.0024 to 0.0075)
Max. outer roll diameter					Ø127 (5)
			Ø214 (8.42): When the optional External Media Roll Hanger is used.
Roll direction				Outside (standard), Inside
Inner core diameter			25.4 to 38.1, or 76.2 (1 to 1.5, or 3) (See NOTE 2.)

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC approved media.

2.When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the optional External Media Roll Hanger is required.

A1.3.2 Detection Area of the Transmissive Sensor

The Transmissive sensor is fixed and positioned at 6.35 mm right of the center of the media path. The Transmissive Sensor detects a gap between labels, as illustrated below.

	Area to be detected.
Sensor position
		Label
		Gap
Min. 2 mm
(Min. 6 mm:		Label
cut mode)
	Min. 8 mm

Sensor position

Print side

Media feed direction

6.35mm

EA1- 4