Regular Cleaning
Cleaning the main chargers and LED print heads
If the inside of the main chargers and the print heads of the LED are dirty, the dirt will be transferred to the copied image. Clean them following the procedure below.
1
Open the front cover.
2
|
| 3 | 4 |
| 2 |
| |
1 |
|
| |
|
|
|
Pull out the cleaner until the mark appears and return it. Repeat this 3 times for each of the 4 colors.
3 | 1 |
| |
| 1 |
2 |
Put your fingers in the waste toner box front grooves and take it out toward you pushing down the top latch, and then clean the LED print heads. For instructions on how to clean the LED print heads, see the following:
&P.37 “Replacing Waste Toner Box” (Steps 2 to 6)
4 | 3 |
Close the front cover pressing both edges.
43