Replacing Waste Toner Box
Replacing Waste Toner Box
When “Dispose of used toner” appears on the touch panel, replace the waste toner box according to the following procedures.
1 | 1 |
| |
| 1 |
2 |
Open the front cover, and put your fingers in the waste toner box front grooves, then take it out toward you pushing down the top latch.
2
Pull down the 4 green levers located under the toner cartridges.
3 1
2 |
Take out the LED print head cleaner inside the cover.
Never attempt to incinerate waste toner boxes.
4 Y M C K
Insert the cleaner through the service hole of the developer to the end.
5
3
Pull the cleaner back out until the round hole appears. Repeat this 3 times for each of the 4 colors. When you finish cleaning the LED print head, return the 4 green levers located under the toner cartridges.
6 |
Set a new waste toner box, and close the front cover pressing both edges.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
37