Toshiba 2050c, 2550c, 2551c, 2051c quick start STUDIO2050C/2550C, e-STUDIO2051C/2551C Specifications

Chapter 6 INFORMATION ABOUT EQUIPMENT

e-STUDIO2050C/2550C, e-STUDIO2051C/2551C Specifications

Model name		FC-2050C/2550C
		FC-2051C/2551C
Type		Desktop type
Original glass		Fixed
Printing (copying) system		Indirect electrophotographic method
Developing system		2-component magnetic brush developing
Fixing method		Roller fusing
Photosensor type		OPC
Original scanning system		Flat surface scanning system
		(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
		feeding the original)
Original scanning sensor		Linear CCD sensor
Scanning light source		LED
	Scanning	600 dpi x 600 dpi
Resolution	Writing	Black-and-white: 600 dpi x 1200 dpi, 1 bit
		Color, Grayscale: 600 dpi x 600 dpi, 5 bits
Acceptable originals		Sheets, books
Acceptable original size		Max. A3 or LD
	Drawer	A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K,
Acceptable copy		16K-R
paper size	Bypass	Paper size within 100 - 297 mm (3.94" - 11.69") (Length),
		148 - 432 mm (5.83" - 17.01") (Width)
Acceptable copy	Drawer	60 - 163 g/m2 (16 lb. Bond - 90 lb. Index)
paper weight	Bypass	Continuous paper feed / Single paper feed: 60 - 209 g/m2 (16 lb. Bond - 110 lb. Index)
First copy time	Black-and-white	Approx. 8.2 seconds
(A4 or LT
	Color	Approx. 10.3 seconds
portrait)
Continuous copy speed		Refer to the Copying Guide.
Multiple copying		Up to 999 sheets (digital key entry)
	Black-and-white	Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
		Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
		Both edges: 2.0±2.0 mm (0.08"±0.08")
Excluded image	Color	Leading edge: 5.0 mm +2.0 mm (0.20"±0.08"),
		Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
width
		Both edges: 2.0±2.0 mm (0.08"±0.08")
	Printer (Black-	Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
		Trailing edge: 4.2 mm +1.2 mm -2.8 mm (0.17" +0.05" -0.11"),
	and-white/Color)
		Both edges: 4.2±2.0 mm (0.08"±0.08")
Reproduction	Actual size	100±0.5%
		25 - 400% (in 1% increments)
ratio	Zoom
		For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Paper supply	Drawer	Approx. 250 sheets (80 g/m2, 20 lb. Bond)
	Bypass	Approx. 100 sheets (80 g/m2, 20 lb. Bond)
Exit tray loading capacity		Approx. 550 sheets (80 g/m2, 20 lb. Bond)
Toner density adjustment		Magnetic auto-toner system + Pixel count system
Exposure control		Automatic plus manual selection from 11 exposure step
USB interface		USB 2.0 (Hi-Speed)
Environment (for normal use)		Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power		AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
consumption
		AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or less
(including optional equipments)
Dimensions (equipment only)		575 mm (22.6") (W) x 590 mm (23.2") (D) x 662 mm (26.0") (H)
Weight		e-STUDIO2050C/2550C: Approx. 57 kg (125.7 lb.) (equipment including developer and drum)
		e-STUDIO2051C/2551C: Approx. 56 kg (123.5 lb.) (equipment including developer and drum)
Space occupied (equipment only)		964 mm (38") (W) x 730 mm (28.7") (D)
		For e-STUDIO2050C/2550C (when hard disk is installed): Max. 1000 sheets or until the
Storage capacity		memory is full (Toshiba's own chart)
		For e-STUDIO2050C/2550C (when hard disk is not installed) or e-STUDIO2051C/2551C: Until
		the memory is full

•This specification varies depending on the printing conditions and the environment.

•Specifications and appearance are subject to change without notice in the interest of product improvement.

72