Chapter 1 PREPARATIONS
Description of Each Component
This section describes the names and operations of the equipment, control panel and touch panel.
Front / Right side
18 | 17 | 1 |
16 |
15 |
14 |
13 |
12 |
11 |
1.Reversing Automatic Document Feeder
The stack of originals is scanned one sheet at a time. Both sides of the originals can be scanned. A maximum of 100 sheets (80 g/m2 or 20 lb. Bond) can be placed in one go.
(The maximum number of sheets that can be set may vary depending on the media type of the originals.)
2.Operator’s Manual Pocket (back side)
Keep the manual in this pocket.
3.USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC with a commercially available USB cable.
Back side
2 |
5 |
6 |
7 |
8 | 3 |
| |
9 | 4 |
| |
10 |
|
8.Paper holding lever
Use this to place paper on the bypass tray.
9.Paper feed cover (of the equipment)
Open this cover when releasing paper misfed in the drawer feeding area.
10.Paper feed cover
Open this cover when releasing paper misfed in the Paper Feed Pedestal or Large Capacity Feeder.
11.Paper size indicator
The size of the paper set in the drawer can be checked.
4.Network interface connector
Use this connector when connecting this equipment to a network.
5.USB port
Use this connector when printing files stored in a USB device or storing scanned data into the USB device. The Front USB Cable is required for using the USB port.
6.Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it when paper misfeeds occur.
7.Bypass tray
Use this to perform printing on special media types such as OHP film, etc.
&P.23 “Bypass copying” in this manual
12.Paper Feed Pedestal and Additional Drawer Module or Large Capacity Feeder
Use the Paper Feed Pedestal to add one drawer. The Additional Drawer Module can be installed in this device. A maximum of 550 sheets (80 g/m2 or 20 lb. Bond) of plain paper can be placed in one go.
A maximum of 2000 sheets (80 g/m2 or 20 lb. Bond) of plain paper can be placed in the Large Capacity Feeder.
13.Paper Feed Unit
Use the Paper Feed Unit to add the second drawer. A maximum of 550 sheets (80 g/m2 or 20 lb. Bond) of plain paper can be placed in one go.
14.Drawer
A maximum of 250 sheets of plain paper can be placed in one go.
&P.15 “Placing paper” in this manual