Toshiba GD-1320 manual  Originals and paper  Acceptable size of paper

Page 43

2 SENDING/RECEIVING A FAX

Originals and paper

Acceptable size of paper

A3, B4, A4, B5, A5, FOLIO, LD, LG, LT, ST and COMP sized paper are available.

The printing range of each size of paper is as follows: As shown in the figures below, if an original document contains any information in the shaded area, it is not printed on the paper.

5 mm		5 mm
5 mm		5 mm
(0.2 inch)		(0.2 inch)

5mm (0.2 inch)

5 mm		5 mm					5 mm
(0.2 inch)		(0.2 inch)					5 mm
(0.2 inch)		(0.2 inch)					(0.2 inch)
							(0.2 inch)
		5 mm			5 mm
		(0.2 inch)			(0.2 inch)

Set the paper in the drawers or the Large Capacity Feeder. The bypass tray is not available.

Regardless of whether or not the Finisher is installed, paper exits on the receiving tray.

Drawers can be set for fax use only. For details of the operation, refer to the Copying Guide.

Default setting for RX printing

To print the received fax, the paper with the same width as the original is used. Depending on the length of the original, “RX reduction printing” or “Discard printing” (both of them are set to ON by manufacturer default) are applied.

P.104 “Setting RX printing”

When an original is shorter or the same as the paper printing area

It is printed in the original size.

When an original is longer than the paper printing area

It is printed according to the following priority:

When an original is up to 10 mm (0.4 inch) longer than the printing area: the part of the originals that exceeds the paper printing area is discarded.

When an original exceeds the printing area by more than 10 mm (0.4 inch): the original image is reduced to 75 % (reduction printing). If the image still cannot be fitted into the printing area, paper larger than the original is selected. In case there is no larger paper available, the original is printed with the image divided.

Receiving a Fax 41

Image 43

Contents Operator’s Manual for FAX Unit Page Preface PrefaceToshiba America Business Solutions, Inc For Canada only Toshiba Australia PTY Limited Toshiba of Canada Limited Explanation for control panel and touch panel  How to read this manual  Symbols in this manualBefore Reading This Manual  Model and series names in this manual Description of original/paper direction  Accessories Trademarks  Disclaimer notice General PrecautionsPage Contents Specifications of GD-1320/GD-1260 114 User SettingsAdministrator Settings Troubleshooting 112Description of Each Component Connecting Cables Control panel Description of Each ComponentMemory RX Description of Each Component Header area  Touch panel Options Line Connecting CablesReceiving a Fax Sending a FaxPress the FAX button on the control panel  Basic proceduresSending a Fax Place the originalsTo display the preview screen, press Preview Specify the recipientPress Send Batch transmission function Redial functionSending the next original  Original scanning range  Handling an original  Originals that can be sentLower the Original Cover or Radf slowly  Placing the originals on the original glass Placing the originals on the Radf Sending different width originals Precautions for using the Radf Making settings  Setting the transmission conditionsResolution ECM  Changing the settings for each  Direct entry with digital keys  Specifying the recipientConfirm the fax number displayed on the fax screen  Specifying the recipient in the address book Searching by ID number  Group entryPress Known ID Then press OK Press Search  Searching for the recipients fax numberSelecting the Ldap server  Confirming the recipients Press Monitor  Other transmissions  On-hook transmissionPress Preview on the fax menu  Off-hook transmission Displaying the preview Replace the handset of the external telephoneSending a Fax  Manual reception  Reception modeReceiving a Fax  Auto reception Memory reception  Originals and paper  Acceptable size of paper  Default setting for RX printingNorth American format  Paper priority when there is no same size paperFormat Page Checking Communications Canceling the Transmission Checking reserved transmissions Checking CommunicationsPress JOB Status Select FAX  Checking communication status log Registering recipients’ fax numbers to the address book List of the communication status is displayedPress JOB Cancel Canceling the Transmission Canceling the memory transmission  When using the original glass When using the Radf Reversing Automatic Document Feeder  Canceling direct transmissions Press JOB STATUS, and then select the FAX tab  Canceling reserved transmissionsMailbox Transmission Advanced FunctionsTransmitting 2-Sided Originals Specify the recipient’s fax number Priority Transmission  Polling transmission Polling CommunicationPress the Start button on the control panel  Polling receptionPress the Advanced tab, and then press Polling Relay station mailbox Mailbox TransmissionConfidential mailbox Bulletin board mailbox Registering an original  Registering/printing/deleting an originalPress the Start button on the control panel Press the Advanced tab, and then press ITU Mailbox  Printing an original Deleting an original  Sending an original  Sending/retrieving an original Retrieving an original Specify the recipients fax number  Creating the confidential or bulletin board mailbox  Creating/modifying/deleting a mailboxMODIFY, and then OK  Creating/modifying a relay station mailboxMailbox Transmission  Deleting a mailbox Confirmation screen for the deletion is displayed. Press YES Press the Advanced tab, and then press Chain Dial Comm Chain Dial CommunicationCanceling delayed transmission reservation Delayed Transmission ReservationRecovery Transmission Studio Onramp GatewayOfframp Gateway Setting up the Smtp serverSpecifying an E-mail address Save as File  Select the file format in the File Format box Press the Print button on the control panel Printing Secure Receive fax jobs Use the password set by your administrator for each line Printing Lists & Reports Automatically Lists/Reports Samples Printing Lists & Reports Manually Journal transmission journal/reception journal Printing Lists & Reports ManuallyPress Journal  Reservation listPress the Advanced tab, and then press ITU Mailbox List  Mailbox/relay box reportTransmission Journal Printing Lists & Reports Automatically Transmission journal Lists/Reports Samples Reception journal Relay  Memory transmission report  Multi transmission report  Transmission report Relay TX orig. terminal report  Multi polling report Relay TX end terminal report  Relay TX relay station report Mailbox reception report  Relay station reportPage Administrator Settings User Settings Fax settings User SettingsTX Type Set each setting item, and then press OKResolution Original ModeTTI Preview SettingSecure Receive Forced Setting ExposureAdministrator Settings FAX menu is displayed Following section describes each menu  Registering the terminal ID Press Terminal ID Set each setting option, and then press OKPress Initial Setup  Setting the initial setupExample of how sender information is printed on paper Dial Type / Dial Type LINE2 RX ModeMonitor Volume / Completion Tone Volume Set each option, and then press OKPress RX Print Set each option, and then press OK  Setting RX printingDiscard Reduction Duplex PrintRotate Sort  Setting recovery transmission RX only 24HR  Setting 2nd Line for FAX UnitRX only Timer TX / RXEnable  Setting Secure ReceiveWeekly Schedule  Setting a password for printingPress NEW Password Select Line 1 or LineIt can be set also on the TopAccess menu Specifications of GD-1320/GD-1260 114 Troubleshooting 112 Error codes Troubleshooting Error messages Transmission troubles  Transmission/reception troubleReception troubles LD, LG, LT, LT-R, ST, ST-R, Comp Specifications of GD-1320/GD-1260Numerics Index114 Page GD-1320/GD-1260