Toshiba DP-1810 manual Registering other standard sizes, Code No

3 Press the [COPY] button several times until the lamp of the paper size you placed in the drawer is lit.

If the [FUNCTION CLEAR] button is pressed at this step, the size is not registered and the equipment will return to its normal status.

4 Press the [START] button. The paper size has been registered.

Registering other standard sizes

When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this size as “OTHER” size. Key in the code number of the paper size to register it as “OTHER” size.

See the table below for the code number of each size.

Paper size	Code No.	Paper size	Code No.
A3	01	B5-R	06
A4	02	A5-R *1	07
A4-R	03	FOLIO	13
B4	04	COMP	14
B5	05	13"LG	16

*1 A5-R and ST-R can be placed only on the bypass tray.

In this section, A4 size is registered in the drawer of the equipment as an example.

1 Press and hold the [COPY] and [DRAWER] buttons simultaneously for more than two seconds.

“Fnc” appears on the LED display.

Preparation 3 - Registering Size of Paper Placed 37