Working Inside Your Computer: Dell OptiPlex GX1
Table 1. System-Board Jumper Settings
Jumper | Setting | Description |
PSWD |
| Password features are enabled. |
|
| Password features are disabled. |
BIOS |
| Reserved (do not change). |
BUS66M |
| Reserved (do not change). |
266MHZ* |
| Reserved (do not change). |
300MHZ* |
| Reserved (do not change). |
333MHZ* |
| Reserved (do not change). |
350MHZ* |
| Reserved (do not change). |
400MHZ* |
| Reserved (do not change). |
450MHZ* |
| Reserved (do not change). |
500MHZ* |
| Reserved (do not change). |
*The correct microprocessor speed is automatically detected and set by the system. Do not change the settings of these jumpers.
The system can operate with a microprocessor speed up to 600 megahertz (MHz).
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your online System User's Guide.
jumpered unjumpered
file:///C/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM]