ISA Configuration Utility Messages: Dell OptiPlex GX1
file used by the ICU for this card is now invalid or does not exist. Do you wish to load the file?
No configuration (.cfg) file exists for the card being modified. Do you want to load one?
when you try to add a listed card and the configuration file for this card has been corrupted or deleted from the database.
This message appears when you modify a card and its configuration file does not exist or has been deleted.
1.Insert the original ICU diskette into the diskette drive.
You can create an ISA Configuration Utility diskette from the Dell ResourceCD. See "Preparing to Use the ICU."
2.Change to the db subdirectory on the diskette drive.
For example, type cd a:\db.
3.Use a text editor to search the icu.ndx file for the card ID of the card you want to add or modify.
The card ID forms part of the name of the configuration file. For example, if the card ID is ICU0200, the configuration file is !icu0200.cfg.
4.Copy the configuration file from the original ICU diskette to the backup diskette.
This is | an EISA system. Use | This message appears |
an ECU, | not the ICU, to | if you attempt to run the |
configure your system. | ICU on an EISA | |
|
| system. |
To use the ICU, you must load the utility onto a
You have added a card using settings different from factory default. Reconfigure the card to the settings in the next display (see the card's manual) before installing it.
This message can appear in two situations:
You added an ISA
expansion card, selected OK, and the ICU had to use resource values different from the card's defaults to avoid conflicts.
You added an ISA
expansion card, selected Advanced, and chose resource
Make note of the new card configuration shown in the Card Resource Usage dialog box displayed after this message. Change jumper settings on the ISA expansion card to match the new card configuration.
file:///C/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM]