Dell GX1 technical specifications Memory, Drives, Ports

Page 92

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems

Bus speed	PCI: 33 MHz
	ISA: 8.33 MHz
PCI expansion-card connectors	two (one PCI connector shares an expansion-card slot with an ISA
	connector)
ISA expansion-card connectors	two (one ISA connector shares an expansion-card slot with a PCI
	connector)
ISA expansion-card connector	98 pins
size
ISA expansion-card connector	16 bits
data width (maximum)
PCI expansion-card connector	120 pins
size
PCI expansion-card connector	32 bits
data width (maximum)

Memory

Architecture	64-bit (non-ECC) or 72-bit (ECC), noninterleaved, "PC100" 100 MHz
DIMM sockets	three
DIMM capacities	32-, 64-, 128-, and 256-MB SDRAM
Standard RAM	32 MB minimum
Maximum RAM	768 MB
BIOS address	F0000h

Drives

Externally accessible bays	one 5.25-inch bay for diskette, tape, or CD-ROM drive; one 3.5-inch
	bay for a diskette drive
Internally accessible bays	one 3.5-inch bay for a 1-inch-high hard-disk drive

Ports

Externally accessible:
Serial (DTE)	two 9-pin connectors; 16550-compatible
Parallel	one 25-hole connector (bidirectional)
Video	one 15-hole connector

file:///C/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM]

Image 92

Contents Initial release 7 Dec Last revised 31 Jan System Features OverviewHardware Features 640 × True-color 32 bpp 85 Hz 800 ×Software Features Manageability Features Dell OpenManage ProgramFault Management Auto Power On Wakeup On LANTemperature Monitoring Security FeaturesConnecting Peripheral Devices O Ports, Connectors, and IndicatorsParallel Port Connector Mouse ConnectorUSB Connectors Integrated NIC ConnectorAudio Connectors Video ConnectorSerial Port Connectors Keyboard ConnectorUsing the Power Switch Using the Optional Stand for Vertical Orientation Attaching the Optional Stand for Vertical OrientationEnergy Star Compliance Energy Star EmblemAccessing Online Documentation Getting HelpEntering the System Setup Program Enter the System Setup program as followsSystem Setup Screens System Setup ScreensPage Using the System Setup Program System Setup OptionsSystem-Setup Navigation Keys Keys Action TimeDrives Primary and Secondary DateDiskette Drive A, Diskette Drive B, and Use ZIP as a or B Reserved Memory CPU Speed Num LockChassis Intrusion DAC SnoopPassword Status Keyboard ErrorsSystem Password Boot Sequence Device-List Screen Navigation Keys Keys ActionSample Device List Screen Setup Password Saving Eide Hard-Disk Drive Power Power ManagementSaving Monitor Power Sound MouseParallel Mode Serial Port 1 and Serial PortParallel Port IDE Hard DiskUsing the System Password Feature DisketteSpeaker System Data OptionsAssigning a System Password Using Your System Password to Secure Your System Type the password and press EnterUsing the Setup Password Feature Deleting or Changing an Existing System PasswordAssigning a Setup Password Page Responding to Error Messages Back to ContentsOverview Quick Start About the ICUICU Database When to Run the ICUPreparing to Use the ICU Backing Up the ICU Diskette Accessing HelpStarting the ICU ICU Keys Keys Action Adding a Listed CardMaking Selections in the ICU Add Network Card Dialog Box Configuration Settings Dialog Box for Assigning an IRQ Line Adding an Unlisted Card Specify Interrupt Dialog Box Specify I/O Port Dialog Box Modifying a Card Removing a Card Viewing Resources System Resource Usage Dialog BoxSaving the System Configuration Exiting From the ICULocking and Unlocking Cards Locking and Unlocking All ResourcesLocking and Unlocking Configuration Resources Safety First For You and Your Computer Before You BeginRemoving the Computer Cover Unpacking Your Hardware OptionReplacing the Computer Cover Replacing the Computer CoverInside Your Computer Computer Orientation ViewJumpers System Board JumpersSystem-Board Jumper Settings Description BUS66MSystem Board and Riser Board Labels LPT1Removing and Replacing the Expansion-Card Cage Removing the Expansion-Card CageReplacing the Expansion-Card Cage System Board Features Expansion Cards Expansion Cards Expansion SlotsRemoving the Filler Bracket Removing an Expansion Card Adding Memory DIMMs and Dimm SocketsPerforming a Memory Upgrade Installing a Dimm Installing a Dimm Removing a Dimm Adding Video MemoryInstalling a Video-Memory Upgrade Module Upgrading the Microprocessor Removing the MicroprocessorReplacing the System Battery Page System Battery and Battery Socket Drive Locations Removing and Replacing Front-Panel Inserts Removing the Front-Panel Insert for a 5.25-Inch BayConnecting Drives DC Power Cable ConnectorInstalling a Drive in the 5.25-Inch Drive Bay Removing the 3.5-Inch Diskette Drive/Bracket Assembly Installing the 5.25-Inch Diskette Drive Bracket Attaching Cables to a Drive in the 5.25-Inch Drive Bay Installing an Eide Hard-Disk Drive Eide Drive AddressingRemoving the Hard-Disk Drive Bracket Securing the Hard-Disk Drive to the Bracket ALERT! Cover was previously removed Page Installing Scsi Devices Scsi Configuration GuidelinesGeneral Procedure for Installing Scsi Devices Page ALERT! Cover was previously removed Partitioning and Formatting Scsi Hard-Disk Drives Expansion Bus MicroprocessorSystem Information Ports MemoryDrives Video Key CombinationsControls and Indicators PowerPhysical EnvironmentalBack to Contents ICU Error Messages Message Probable Cause Corrective ActionLoaded card is not a Conflictingcard This is An Eisa system. Use Probable Cause Corrective Action Configuration Manager MessagesMessage Error Failed to activate device, CSN=Card Select Number See Modifying a Card for instructions See Adding a Listed Card for instructions

Related manuals

Manual 12 pages 4.6 Kb