Dell GX1 technical specifications ALERT! Cover was previously removed

Page 89

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems

If you are installing an internal SCSI device, connect a DC power cable to the power input connector on the SCSI device.

If you are installing an external SCSI device, connect the socket end of the power cable into the AC power receptacle on the back of the SCSI device. Connect the other end of the power cable into a standard electrical wall outlet.

Check all other cable connections. Fold all internal cables out of the way to provide airflow for the fan or cooling vents.

10.If you installed an externally accessible device, remove a front-panel insert for the drive bay. See "Removing and Replacing Front-Panel Inserts" for instructions.

11.Replace the computer cover, and reconnect your computer and peripherals to their power sources.

12.Turn on the peripherals connected to the computer.

13.Start the computer system.

NOTE: If the device you just installed is the primary hard-disk drive and no operating system is installed, you must start the computer using a bootable diskette or CD.

To boot the system from a diskette, insert a bootable diskette (such as an operating system installation or recovery diskette) into diskette drive A, and turn on the computer.

To boot the system from a CD, enter the System Setup program and set the Boot Sequence to CD-ROM First. Insert a bootable CD (such as an operating system installation CD or the Dell ResourceCD) into CD-ROM drive, and turn on the computer.

NOTE: If Enabled, the Chassis Intrusion option will cause the following message to be displayed at the next system start-up:

ALERT! Cover was previously removed.

14.If necessary, enter the System Setup program and update the system configuration information.

If you installed a SCSI hard-disk drive, set the Drive Type option for the appropriate drive under Drives: Primary and Secondary to None.

NOTE: Tape drives attached to a SCSI host adapter card are not part of the system configuration information.

After you update the System Setup options, reboot the system.

15.If you installed a SCSI hard-disk drive, partition and format the drive, as described in "Partitioning and Formatting SCSI Hard-Disk Drives," before proceeding to the next step.

file:///C/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM]

Image 89

Contents Initial release 7 Dec Last revised 31 Jan Overview System Features640 × True-color 32 bpp 85 Hz 800 × Hardware FeaturesSoftware Features Dell OpenManage Program Manageability FeaturesFault Management Wakeup On LAN Auto Power OnSecurity Features Temperature MonitoringO Ports, Connectors, and Indicators Connecting Peripheral DevicesMouse Connector Parallel Port ConnectorUSB Connectors Integrated NIC ConnectorVideo Connector Audio ConnectorsSerial Port Connectors Keyboard ConnectorUsing the Power Switch Attaching the Optional Stand for Vertical Orientation Using the Optional Stand for Vertical OrientationEnergy Star Emblem Energy Star ComplianceGetting Help Accessing Online DocumentationEnter the System Setup program as follows Entering the System Setup ProgramSystem Setup Screens System Setup ScreensPage System Setup Options Using the System Setup ProgramSystem-Setup Navigation Keys Keys Action TimeDrives Primary and Secondary DateDiskette Drive A, Diskette Drive B, and Use ZIP as a or B Reserved Memory Num Lock CPU SpeedChassis Intrusion DAC SnoopPassword Status Keyboard ErrorsSystem Password Device-List Screen Navigation Keys Keys Action Boot SequenceSample Device List Screen Setup Password Saving Eide Hard-Disk Drive Power Power ManagementSaving Monitor Power Mouse SoundSerial Port 1 and Serial Port Parallel ModeParallel Port IDE Hard DiskDiskette Using the System Password FeatureSpeaker System Data OptionsAssigning a System Password Type the password and press Enter Using Your System Password to Secure Your SystemDeleting or Changing an Existing System Password Using the Setup Password FeatureAssigning a Setup Password Page Back to Contents Responding to Error MessagesOverview About the ICU Quick StartICU Database When to Run the ICUPreparing to Use the ICU Backing Up the ICU Diskette Accessing HelpStarting the ICU ICU Keys Keys Action Adding a Listed CardMaking Selections in the ICU Add Network Card Dialog Box Configuration Settings Dialog Box for Assigning an IRQ Line Adding an Unlisted Card Specify Interrupt Dialog Box Specify I/O Port Dialog Box Modifying a Card Removing a Card System Resource Usage Dialog Box Viewing ResourcesExiting From the ICU Saving the System ConfigurationLocking and Unlocking Cards Locking and Unlocking All ResourcesLocking and Unlocking Configuration Resources Before You Begin Safety First For You and Your ComputerUnpacking Your Hardware Option Removing the Computer CoverReplacing the Computer Cover Replacing the Computer CoverComputer Orientation View Inside Your ComputerSystem Board Jumpers JumpersBUS66M System-Board Jumper Settings DescriptionLPT1 System Board and Riser Board LabelsRemoving the Expansion-Card Cage Removing and Replacing the Expansion-Card CageReplacing the Expansion-Card Cage System Board Features Expansion Cards Expansion Slots Expansion CardsRemoving the Filler Bracket Removing an Expansion Card DIMMs and Dimm Sockets Adding MemoryPerforming a Memory Upgrade Installing a Dimm Adding Video Memory Installing a Dimm Removing a DimmInstalling a Video-Memory Upgrade Module Removing the Microprocessor Upgrading the MicroprocessorReplacing the System Battery Page System Battery and Battery Socket Drive Locations Removing the Front-Panel Insert for a 5.25-Inch Bay Removing and Replacing Front-Panel InsertsDC Power Cable Connector Connecting DrivesInstalling a Drive in the 5.25-Inch Drive Bay Removing the 3.5-Inch Diskette Drive/Bracket Assembly Installing the 5.25-Inch Diskette Drive Bracket Attaching Cables to a Drive in the 5.25-Inch Drive Bay Eide Drive Addressing Installing an Eide Hard-Disk DriveRemoving the Hard-Disk Drive Bracket Securing the Hard-Disk Drive to the Bracket ALERT! Cover was previously removed Page Scsi Configuration Guidelines Installing Scsi DevicesGeneral Procedure for Installing Scsi Devices Page ALERT! Cover was previously removed Partitioning and Formatting Scsi Hard-Disk Drives Expansion Bus MicroprocessorSystem Information Ports MemoryDrives Key Combinations VideoPower Controls and IndicatorsPhysical EnvironmentalBack to Contents Message Probable Cause Corrective Action ICU Error MessagesLoaded card is not a Conflictingcard This is An Eisa system. Use Probable Cause Corrective Action Configuration Manager MessagesMessage Error Failed to activate device, CSN=Card Select Number See Modifying a Card for instructions See Adding a Listed Card for instructions

Related manuals

Manual 12 pages 4.6 Kb