Dell W07B Removing the Processor, Installing the Processor, Removing the Intrusion Switch

Page 21

4.Follow the procedures in After Working Inside Your Computer.

Removing the Processor

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)stand cover

b)VESA stand

c)back cover

d)system board cover

e)heat sink

3.Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the processor cover and remove the processor from its socket.

Installing the Processor

1.Insert the processor into the processor socket. Ensure the processor is properly seated.

2.Press the release lever down and then move it inward to secure it with the retention hook.

3.Install:

a)heat sink

b)system board cover

c)back cover

d)VESA stand

e)stand cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Intrusion Switch

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)stand cover

b)VESA stand

c)back cover

d)system board cover

e)system fan

3.Disconnect the intrusion-switch cable from the system board and release the cable from its tab on the chassis. Slide and remove the intrusion switch from the computer.

21

Image 21
Contents Regulatory Model W07B Regulatory Type W07B001 Dell Inc. All Rights Reserved Contents Diagnostics System SetupTroubleshooting Your Computer Technical Specifications Contacting DellBefore Working Inside Your Computer Working on Your ComputerRecommended Tools Turning Off Your ComputerClick Shut Down Important Information After Working Inside Your ComputerPage System Overview Removing and Installing ComponentsInstalling the Stand Cover Removing the Stand CoverRemoving the Vesa Stand Removing the Back Cover Installing the Vesa StandRemove the back cover from the computer Removing the Optical Disk Drive Installing the Back CoverInstalling the Optical Disk Drive Removing the Control BoardRemove Removing the Wireless Local Area Network Wlan Card Installing the Control BoardRemoving the Memory Installing the Wlan CardRemoving the System Board Cover Installing the MemoryRemoving the Coin-Cell Battery Installing the System Board CoverRemoving the Heat Sink Installing the Coin-Cell BatteryInstalling the Heat Sink Installing the System FanRemoving the System Fan Installing the Processor Removing the Intrusion SwitchRemoving the Processor Removing the Speakers Installing the Intrusion SwitchRemoving the Power Switch Installing the SpeakersRemoving the Hard Drive Installing the Power SwitchPage Removing the System Board Installing the Hard DrivePage Page Page System Board Components Serial port connectorRemoving the Display Bracket Installing the System BoardPage Page Installing the Display Bracket Installing the Camera Removing the CameraVesa stand Stand cover Removing the Serial Port Installing the Serial Port Page Boot Sequence System SetupFollowing table displays the system setup navigation keys Navigation KeysSystem Setup Options Exit Exits and starts the computer Advanced Boot OptionsNot selected. The other options are Date/TimeEnable Smart Reporting This option is disabled by default Reporting Technology specificationUSB Configuration Enable Audio option is selectedSystem Password With a system password and/or HDD passwordPrimary password Internal HDD-0 PasswordEnabled DisabledAll Enabled by default Keys will restore to default settingsOption is enabled by default Enabled by defaultOptionDescription Bluetooth 255.255.255.255 Verbose ModeSystem and Setup Password Updating the BiosRe-start the computer ComputerPress Y to save the changes. The computer reboots Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsPage Important Information Diagnostic Power LED Codes Troubleshooting Your ComputerBeep Codes Error MessagesMessage Page Feature Technical SpecificationsSpecification Feature SpecificationControl keys Mini PCI Express OneAdapter bracket Ports and Connectors Tilt Degrees to 30 degrees Feature Specification Non-TouchKg 8.63 kg 17.94 lb 19.02 lb Reading data from or writing data to the hard driveBack of the computer and the electrical outlet Power supply diagnostic lightPage Contacting Dell