Option | Description | |
|
| |
| • Exit - Exits and starts the computer. | |
Advanced Boot Options | The Enable Legacy Option ROMs option will allow the legacy option ROMs to load, | |
| when in UEFI boot mode. Without this option, only UEFI option ROMs will load. This | |
| option is required for Legacy boot mode. This Legacy boot mode is not allowed when | |
| you enable the Secure Boot. By default, the Enable Legacy Option ROMs | |
| not selected. The other options are: | |
| • Load Defaults - Restores the default settings of the computer. | |
| • Apply - Enables you to apply the settings. | |
| • Exit - Exits and starts the computer. | |
Date/Time | Allows you to set the date and time. The changes to the system date and time takes | |
| effect immediately. | |
Table 3. System Configuration |
|
|
|
| |
Option | Description | |
|
| |
Integrated NIC | Allows you to enable or disable the integrated network card. You can set the | |
| integrated NIC to: | |
| • | Disabled |
| • | Enabled |
| • Enabled w/PXE (This option is selected by default) | |
| • | Enabled w/ImageServer |
| • Enable UEFI Network Stack | |
|
| NOTE: Depending on the computer and its installed devices, the items listed in |
|
| this section may or may not appear. |
Serial Port | Allows you to define the serial port settings. You can set the serial port to: | |
| • | Disabled |
| • COM1 (This option is selected by default) | |
| • | COM2 |
| • | COM3 |
| • | COM4 |
|
| NOTE: The operating system may allocate resources even though the setting is |
|
| disabled. |
SATA Operation | Allows you to configure the operating mode of the integrated SATA hard drive | |
| controller. | |
| • Disabled - The SATA controllers are hidden. | |
| • ATA - SATA is configured for ATA mode. | |
| • AHCI - SATA is configured for AHCI mode. This option is enabled by default. | |
Drives | Allows you to enable or disable the various | |
| • | |
| • |
41