Dell W07B With a system password and/or HDD password, System Password, Primary password, Disable

Option	Description
		NOTE: If you delete the admin password, the system password also gets deleted.
		You can also use the admin password to delete the HDD password. You cannot
		set an admin password if a system password or an HDD password is already set.
		You must set the admin password first, if you want to use the admin password
		with a system password and/or HDD password.
System Password	Allows you to set, change, or delete the computer password (previously called the
	primary password).
	The drive does not have a password set by default.
	• Enter the old password
	• Enter the new password
	• Confirm the new password
	The successful changes in the password will take effect immediately.
Internal HDD-0 Password	Allows you to set, change, or delete the password on the computer's internal hard
	disk drive (HDD). Successful changes to this password take effect immediately.
	The drive does not have a password set by default.
	• Enter the old password
	• Enter the new password
	• Confirm the new password
Strong Password	Enable strong password - This option is disabled by default.
Password Configuration	This field controls the minimum and maximum number of characters allowed for the
	admin and system passwords.
	•	Admin Password Min
	•	Admin Password Max
	•	System Password Min
	•	System Password Max
Password Bypass	Allows you to bypass the System Password and the internal HDD password prompts
	during a system restart.
	• Disabled - Always prompt for the system and internal HDD password when
		they are set. This option is disabled by default.
	• Reboot Bypass - Bypass the password prompts on restarts (warm boots).
		NOTE: The system will always prompt for the system and internal HDD
		passwords when powered on from the off state (a cold boot). Also, the system
		will always prompt for passwords on any module bay HDDs that may be present.
Password Change	Allows you to determine whether changes to the system and hard disk passwords are
	permitted when an administrator password is set.
	• Allow Non-Admin Password Changes - This option is enabled by default.
Computrace	This field lets you activate or disable the BIOS module interface of the optional
	Computrace Service from Absolute Software.
	• Deactivate - This option is enabled by default.
	•	Disable

43