Dell 7010 owner manual OptionDescription

Page 38

OptionDescription

For Mini-Tower, Desktop, Small Form Factor the options are:

Enable Boot Support

Enable Rear Dual USB Ports

Enable Rear Quad USB Ports

Enable Front USB Ports

For Ultra Small Form Factor, the options are:

Enable Boot Support

Enable Rear Dual USB 2.0 Ports

Enable Rear Dual USB 3.0 Ports

Enable Front USB Ports

NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

Miscellaneous Devices

Allows you to enable or disable various on-board devices.

Enable PCI Slot - This option is enabled by default.

Table 4. Security

Option

Description

 

 

Admin Password

This field lets you set, change, or delete the administrator (admin) password

 

(sometimes called the setup password). The admin password enables several

 

security features.

 

The drive does not have a password set by default.

 

• Enter the old password

 

• Enter the new password

 

• Confirm the new password

System Password

Allows you to set, change, or delete the computer password (previously called the

 

primary password).

 

The drive does not have a password set by default.

 

• Enter the old password

 

• Enter the new password

 

• Confirm the new password

Internal HDD-0 Password

Allows you to set, change, or delete the password on the computer's internal hard

 

disk drive (HDD). Successful changes to this password take effect immediately.

 

The drive does not have a password set by default.

 

• Enter the old password

 

• Enter the new password

 

• Confirm the new password

Strong Password

Enable strong password - This option is disabled by default.

Password Configuration

This field controls the minimum and maximum number of characters allowed for the

 

admin and system passwords.

38

Image 38
Contents Regulatory Model D03S Regulatory Type D03S002 Dell Inc Contents Troubleshooting Your Computer System SetupDiagnostics Specifications Contacting DellWorking on Your Computer Before Working Inside Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Recommended Tools Removing and Installing ComponentsInstalling the Cover Removing the CoverInstalling the Front Bezel Removing the Front BezelRemoving The Wireless Local Area Network Wlan Card Installing The Wlan CardRemoving the Drive Cage Installing the Drive Cage Removing the Optical DrivePage Pry the sides of the bracket to remove the optical drive Installing the Optical DriveRemoving the Hard Drive Installing the Hard Drive Removing the Intrusion Switch Removing the Memory Installing the Intrusion SwitchMemory Module Guidelines Installing the Memory Removing the Coin-Cell BatteryRemove Cover Front bezel Drive cage Installing the Coin-Cell BatteryRemoving the System Fan Page Installing the System Fan Removing the SpeakerInstalling the Speaker Removing the Power-Switch CableInstalling the Power-Switch Cable Removing the Input/Output I/O PanelRemove Cover Installing the Input/Output I/O PanelRemoving the Power Supply Page Page Installing the Power Supply Lift the power supply out of the computerRemoving the Heat Sink Page Installing the Heat Sink Removing the ProcessorInstalling the Processor Removing the System BoardPage Processor Power connectorSystem Board Components Installing the System Board Page Following table displays the system setup navigation keys System SetupBoot Sequence Navigation KeysSystem Setup Options Ahci Sata is configured for Ahci mode Disabled The Sata controllers are hiddenATA Sata is configured for ATA mode RAID on Sata is configured to support RAID modeOptionDescription Permitted when an administrator password is set They are set. This option is disabled by defaultPassword Change Is enabled and visible to the operating systemAll Enabled by default Reset All Keys- Resets to default settingKeys will restore to default settings Option is enabled by defaultPower loss. You can set the AC Recovery to Disabled by defaultAC Recovery Power Off defaultKeyboard Errors Signals. For Ultra Small Form Factor onlyIs enabled by default Sequence required to enter the Bios Boot Option MenuSerr Messages Software communicates. The default IP address isCommunicate. The default IP port is ImageServer IPSystem and Setup Password Updating the BiosJumper Settings Click Drivers & DownloadsAssigning a System Password and Setup Password ComputerDisabling a System Password Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Amber LED State White LED State Description Troubleshooting Your ComputerPower LED Diagnostics Possible system board resource and/or hardware failureError Messages Beep CodeProblem Error Message DescriptionFailure Configuration Information-please Run Setup program Invalid MemorySystem installed on it. Insert a bootable floppy disk Disk errorNot a boot diskette Value Memory sizeSelected drive Write faultWrite fault on Page Specification SpecificationsFeature Feature SpecificationIntegrated Two Channel High Definition Audio Express Chipset CPU-GPU ComboDiscrete PCI Express x16 graphics adapter Audio Front Panel Back PanelPCI Express x1 data width maximum one PCI Express lane Mini-Tower and Desktop One 36-pin connectorForm factor White light indicates sleep state of the computer ConnectorFront of the computer Power button light Power Wattage Maximum Heat Dissipation Voltage Physical Height Width Depth WeightPhysical Height Width Depth Weight Ultra Small Form Factor 24.00 cm 30 kg 7.28 lb InchesPage Contacting Dell
Related manuals
Manual 47 pages 49.28 Kb