AMX nxc manual NXC-IRS4 4-Port IR/S Control Card, NXC-IRS4 Specifications

NXC-IRS4 4-Port IR/S Control Card

NXC-IRS4 4-Port IR/S Control Card

The NXC-IRS4 4-Port IR/S Control Card (FG2023) provides four IR/Serial input control ports with LED status feedback.

Each port in the NXC-IRS4 stores programmed commands for IR- or serial-controlled devices. FIG. 5 shows the IRS4 card.

FIG. 5 NXC-IRS4 4-Port IR/Serial Control card

Specifications

NXC-IRS4 Specifications

Power Requirements	110 mA @ 12 VDC
Power	+12 VDC power for sensors
Operation:
IR 1-4	4 IR/Serial control ports
Input 1-4
	4 input ports for closure or 0-5 VDC sensing, 200 mA
Memory	32K of IR memory shared between four ports.
IR Frequency range	Support of high-frequency carriers up to 1.14 MHz.
Status LEDs:	Red LED shows IR transmission activity/Yellow LED shows input status activity:
(2 LEDs per channel)	LED 1: Channel 1 Input (yellow)
LEDs light to indicate	LED 2: Channel 1 IR Out (red)
ON status	LED 3: Channel 2 Input (yellow)
	LED 4: Channel 2 IR Out (red)
	LED 5: Channel 3 Input (yellow)
	LED 6: Channel 3 IR Out (red)
	LED 7: Channel 4 Input (yellow)
	LED 8: Channel 4 IR Out (red)
Connections/wiring	• Two 2-pin 3.5 mm captive-screw terminals
	• Two CC-NIRC IR Emitters

NetLinx Cardframe, Control Cards, and NetModules - Operation Reference Guide 15