AMX nxc manual Command Description Xchm, Mode 3 Example 100100… x

NXC-IRS4 4-Port IR/S Control Card

NXC-IRS4 Send_Commands (Cont.)

Command	Description
XCHM (Cont.)	Mode 2 Example: <x> <x> <x>
	SEND_COMMAND IR_1,"'XCH-3'"
	Transmits the IR code as 0-0-3.
	SEND_COMMAND IR_1,"'XCH-34'"
	Transmits the IR code as 0-3-4.
	SEND_COMMAND IR_1,"'XCH-343'"
	Transmits the IR code as 3-4-3.
	Mode 3 Example: [[100][100]…] <x> <x>
	SEND_COMMAND IR_1,"'XCH-3'"
	Transmits the IR code as 0-3.
	SEND_COMMAND IR_1,"'XCH-34'"
	Transmits the IR code as 3-4.
	SEND_COMMAND IR_1,"'XCH-343'"
	Transmits the IR code as 100-100-100-4-3.
	Mode 4: Mode 4 sends the same sequences as the 'CH' command. Only use Mode 4 with channels
	0 - 199.

NetLinx Cardframe, Control Cards, and NetModules - Operation Reference Guide 21