ADTRAN 2 x E1 user manual Operation, Main Menu Selections, System Status Screen

61280004L2-1C

Section 3 Operation

MAIN MENU SELECTIONS

System Status Screen

The screen in Figure 3-1displays the status of major system components. This is a status screen only; no configurations can be performed. More detailed information can be obtained by way of the Main Menu (Figure 3-2).

TRACER SYSTEM STATUS

ELAPSED TIME: 00000 DAYS, 00:00:07

-----	ADTRAN TECHNICAL	SUPPORT - 256/963-8716	-----
E1A === C	/ ->>---->>---->>----[	RF UP ]---->>---->>---->>- \	C === E1A
S #(-		-)# S
E1B === U	\ -<<----<<----<<----[	RF UP ]----<<----<<----<<- /	U === E1B
-----			-----

LOCAL	TRACER				REMOTE TRACER
FREQ PLAN B		SITE: ADTRAN			FREQ PLAN A
MIN	NOM			MIN	NOM
[###################_]				[###################_]
	RX POWER	RFC LINK UP:	YES		RX POWER
		CODE SYNC:	YES
MIN	MAX	CARRIER SYNC:	YES	MIN	MAX
[####################]		E1 MUX SYNC:	YES	[####################]
	TX POWER	CHIPPING CODE:	0		TX POWER

=============================================================================

PRESS ‘M’ - MAIN MENU:

Figure 3-1. System Status Screen

The upper portion of the screen indicates how long the system has been running since the last reset operation. The “E1A” and “E1B” labels will be highlighted if any error conditions exist on that E1 interface.

The status of the radio link is indicated as Up or Down. The left portion of the screen reports the status of the local system (the system to which the terminal is attached); the right portion reports the status of the remote system. The approximate transmitter and receiver signal levels are shown via the bar graphs. If the link is down and remote end data is unavailable, the bar graphs will show “-” instead of “x.” RFC Link Up indicates if communications exist on the IF cable connecting the baseband processor to the radio frequency converter. The Code Sync, Carrier Sync, and E1 Mux Sync will all be “yes” for an operational link. Chipping code indicates the code to which the system is set.

26 TRACER 2 x E1 User’s Manual