ADTRAN 2 x E1 user manual Main Menu Screen, Tracer Main Menu

61280004L2-1C

Section 3 Operation

Main Menu Screen

Pressing “M” on any screen will take the user to the Main Menu (see Figure 3-2), from which the subsequent screens can be accessed.

TRACER MAIN MENU

ELAPSED TIME: 00000 DAYS, 00:00:07

===============================================================================

0)TRACER STATUS PAGE

1)TRACER SYSTEM CONFIGURATION MENU

2)TRACER LINK PERFORMANCE HISTORY

3)E1A STATUS/CONFIGURATION/LOOPBACK MENU

4)E1A PERFORMANCE HISTORY

5)E1B STATUS/CONFIGURATION/LOOPBACK MENU

6)E1B PERFORMANCE HISTORY

===============================================================================

PRESS MENU NUMBER, OR [ARROW KEYS] - MOVE UP AND DOWN, [SPACE] - SELECT:

Figure 3-2. Main Menu Screen

To make changes to any of the items in the System Configuration Menu (Figure 3-3), use the keyboard Arrow keys to highlight desired option and make change.

TRACER SYSTEM CONFIGURATION

ELAPSED TIME: 00000 DAYS, 00:00:07

===============================================================================

	LOCAL	TRACER	REMOTE TRACER
	-------------		-------------
	MIN	NOM	MIN	NOM
RX POWER:	[###################_]		[###################_]
	MIN	MAX	MIN	MAX
TX POWER:	[####################]		[####################]
CHIPPING CODE:	0		0
SITE NAME:	ADTRAN LOCAL		ADTRAN REMOTE
MODEM CONTROL:	ON		OFF
PASSWORD ENABLE:	NO		NO
PASSWORD:	*******		*******
FRONT PANEL LOCK: ON			OFF
PERFORMANCE STATS:CLEAR			CLEAR

(*)—INDICATES THAT SETTING DIFFERS FROM THE FRONT PANEL

===============================================================================

PRESS ‘M’ - MAIN MENU, ‘U’,’D’ - MOVE UP AND DOWN, [SPACE] - SELECT:

Figure 3-3. System Configuration Menu Screen

Set Tx Power allows the transmitter power to be adjusted.

Set Chipping Code allows the chipping code to be selected. Each end of the link must be configured for the same chipping code.

Site ID allows a string of up to 32 characters to be entered as a site identifier.

Enable/Disable Password allows password protection to be enabled or disabled. The default setting is Disabled.

Change Password allows the password to be set.

Performance Stats resets all the error counters.

TRACER 2 x E1 User’s Manual 27