12 | AR400 Series Router |
3.Enable IP.
In the CLI, enter the command: enable ip
4.Assign an IP address to VLAN1.
Assign the VLAN1 interface an IP address in the subnet that the PC uses, using the command:
add ip interface=vlan1 ip=ipaddress mask=mask
5.Browse to the GUI.
If you access the Internet through a proxy server, set your browser to bypass the proxy for the IP address you assigned to the VLAN1 interface.
Point your web browser at the IP address of the VLAN interface.
6.Log in and set the password.
At the log in prompt, enter the log in name and password. Passwords are case sensitive.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure the router.
Important To ensure configuration settings are saved correctly, use the GUI menus and buttons to navigate, not your browser’s buttons.
Caution As a security precaution, change the password as soon as possible.
To change the password, select Management > Users from the sidebar menu. Select the Manager account and click Modify.
7.Configure the router.
Use the GUI to continue configuring your router. To access