Allied Telesis AR400 series manual Emission Compliance Statements

54 AR400 Series Router

Emission Compliance Statements

STANDARDS: The AR415S, AR440S, AR441S, and AR442S meet the following standards:

Category	Approval Agency and Requirement
Safety	UL60950-1
	EN60950-1
	AS/NZS 60950
Electromagnetic Compliance	FCC CFR47 Part 15 Class A
	EN55022 Class A
	VCCI Class A
	AS/NZS CISPR22 Class A
Immunity	EN55024
Network Interface	ISDN Limited Network Protocol Analysis
(where applicable)	FCC Part 68, Subpart D
	IC CS-03, Issue 8, Part I and IV
	TBR3
	TBR4
	TR048
	TIA-968-A
	PTC 270
	G.992.1 Annex A (AR440S only)
	G.992.1 Annex B (AR441S only)
	G.991.2 (AR442S only)

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to operate this equipment.

Canadian Department of Communications

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

613-000313 Rev C