Allied Telesis AR400 series manual Hub or Layer 2 Switch

Page 30

30	AR400 Series Router

1.Connect the PC to a router switch port.

The PC can be connected directly, or through your LAN.

To connect the PC directly to the router, use a straight-through Ethernet cable to connect an Ethernet card on the PC to any one of the router’s switch ports. See the following figure.

		PC
Router
					POWER	ON
		4	2
PIC BAY
					100-240 VAC	OFF
ADSL	5	3	1	ASYN0	50/60 Hz	OFF
ADSL	5	3	1	ASYN0	2.1 A
	Switch Ports

To connect via a LAN, use an Ethernet cable to connect the router’s switch port(s) to the device(s) on the LAN. Select the LAN PC from which you wish to configure the router. The PC should be in the same subnet as the part of the LAN that contains the router. For example, the PC could be connected to a hub or Layer 2 switch that is directly connected to one of the router’s switch ports. See the following figure.

Hub or Layer 2 Switch					PC
ON
	10BASE-T/100BASE-TX SWITCH PORTS
	4	3	2	1
OFF
POWER
Router
					POWER	ON
		4	2
PIC BAY
					100-240 VAC	OFF
ADSL	5	3	1	ASYN0	50/60 Hz	OFF
ADSL	5	3	1	ASYN0	2.1 A
	Switch Ports

613-000313 Rev C

Image 30

Contents Installation and Safety Guide AR400 Series Router Table of Contents Electrical Safety Statements Package Contents Models Covered By This GuideAR440S, AR441S and AR442S Package Contents AR450S Package ContentsAR450S Router Installing the AR450SBefore Installing the Router Selecting a SiteInstalling the Router in a Rack Applying Power to the RouterConfiguring the AR450S Using the CLI to configure the AR450SInitiate router start-up Log in and set the password Configure the routerSave the configuration Using the GUI to configure the AR450S Connect the PC to a router switch portAccess the CLI on the router Enable IP Assign an IP address to VLAN1Browse to the GUI Connect to the LAN Connecting Data Cables to the AR450SConnecting the router to your network Connect to the DMZ portSystem LEDs on the AR450S LEDState Function Installing the AR415S AR415S RouterInstalling an Optional PIC Installing the Router in a Rack Check the supply voltage and the router’s rated voltage Configuring the AR415S Using the GUI to configure the AR415SRouter Set PC to automatic IP addressLog Using the CLI to configure the AR415S Installation and Safety Guide Save the configurationAdvanced configuration At the log in prompt, enter the login name and password Connecting Data Cables to AR415S SYS System LEDs on AR415SPWR PICInstalling the AR440S, AR441S, AR442S AR440S, AR441S, AR442S RoutersInstalling an Optional PIC Installing the Router in a Rack Installing the Router on a Wall Applying Power to the Router Configuring the AR440S, AR441S, AR442S Using the GUI to configure the AR440S, AR441S and AR442SHub or Layer 2 Switch Installation and Safety Guide Set PC to automatic IP address Configure the router Using the CLI to configure the router Log in and set the password Connecting Data Cables to AR440S, AR441S, AR442S System LEDs on AR440S, AR441S, AR442S AdslShdsl Default Configuration on AR415S, AR440S, AR441S, AR442S Documentation and Tools CD-ROM Important Safety Instructions Connection to mains voltage supplyTelecommunications Interfaces TNV1 Connection to Isdn networkPorts for the connection of other apparatus TNV3Lightning Danger SafetyElectrical Notices Lightning Activity Electrical Type Class 1 EquipmentGefahr Durch Blitzschlag SicherheitAchtung Gefährliche Spannung VorsichtFare Under Uvejr SikkerhedElektriske Forholdsregler Lynaktivitet Elektrisk Klasse 1-UDSTYRGevaar Voor Blikseminslag VeiligheidWaarschuwingen MET Betrekking TOT Elektriciteit Elektrische Toestellen VAN KlasseAvertissement Danger D’ÉLECTROCUTION SécuritéInformation SUR LES Risques Électriques Équipement DE Classe 1 ÉlectriqueTurvallisuus Sähköön Liittyviä HuomautuksiaSalamaniskuvaara Norme di Sicurezza Avvertenze ElettrichePericolo DI Fulmini Fare for Lynnedslag SikkerhetElektrisitet Elektrisk Type 1- Klasse UtstyrAtenção Perigo DE Choque Elétrico SegurançaAvisos Sobre Características Elétricas Perigo DE Choque Causado POR RaioPeligro DE Rayos SeguridadAvisos Electricos Temperatura Requerida Para LA OperaciónFara FÖR Blixtnedslag SäkerhetTillkännagivanden Beträffande Elektricitetsrisk Elektriskt TYP Klass 1 UtrustningFor the AR440S and AR442S routers For the AR021U PICRJ49C RJ11CCanadian Department of Communications Emission Compliance Statements Category Approval Agency and RequirementStandards The AR450S meets the following standards EC Declaration of Conformity We Allied Telesis Labs LimitedNazareth Avenue Christchurch 8024 NEW Zealand