Allied Telesis AR400 series manual AR415S Router, Installing the AR415S

Installation and Safety Guide 15

AR415S Router

This section describes how to install the AR415S router.

■“Installing the AR415S” below

■“Configuring the AR415S” on page 18

■“Connecting Data Cables to AR415S” on page 23

■“System LEDs on AR415S” on page 24

For corresponding information about installing an AR450S, see “AR450S Routers” on page 7.

For corresponding information about installing an AR440S, AR441S or AR442S, see “AR440S, AR441S, AR442S Routers” on page 25.

Installing the AR415S

Selecting a Site

You can install the router:

■on a level surface such as a desktop or bench

■in a standard 19-inch rack, using the rack-mount kit supplied with the router When you install the router, choose a site that:

■allows adequate airflow around the router and its vents

■is free of dust and moisture

■will maintain an ambient temperature in the range 0 ºC to 40 ºC (32 ºF to 104 ºF)

■will maintain a humidity in the range 5% to 80% non-condensing

■has a reliable and earthed (grounded) power supply, preferably dedicated and filtered

■does not expose cabling to sources of electrical noise such as radio transmitters, broadband amplifiers, power lines, electric motors, and fluorescent fixtures

■allows easy access to the router’s power and cable connections

Before Installing the Router

■Read the safety information “Safety” on page 41.

■Unpack the router. Verify the package contents. If any items are damaged or missing, contact your sales representative.

613-000313 Rev C