Allied Telesis AR400 series manual Default Configuration on AR415S, AR440S, AR441S, AR442S

Installation and Safety Guide 37

Default Configuration on AR415S, AR440S, AR441S, AR442S

The default configuration file boot.cfg loads automatically when the router starts up. This file is stored in the router’s flash memory. The AR415S, AR440S, AR441S and AR442S have the following default configuration:

#Default configuration file boot.cfg

#Set the command help file. (You may have a different help file.) set help=54-275a.HLP

#Enable IP and assign an IP address to the default VLAN.

enable ip

add ip interface=vlan1 ip=192.168.1.1

#Enable the DHCP server, configure a range and a 3 day

#lease policy, and assign the router as a DNS server. enable dhcp

create dhcp policy=lan-dhcp lease=259200

add dhcp policy=lan-dhcp subnet=255.255.255.0 add dhcp policy=lan-dhcp router=192.168.1.1 add dhcp policy=lan-dhcp dnsserver=192.168.1.1

cre dhcp range=standard poli=lan-dhcp ip=192.168.1.100 number=50

#Enable DNS relay, so that DNS will work for DHCP clients. enable ip dnsrelay

The AR450S boot.cfg file has no significant default configuration.

613-000313 Rev C