Allied Telesis AR400 series manual System LEDs on the AR450S, Led, State Function

Page 14

14	AR400 Series Router

System LEDs on the AR450S

The LEDs described in the following table show the operational status and port activity for AR450S routers.

LED	State	Function

Power	Green	The router is receiving power and the power switch is
		ON.

System	Red or	Lit briefly during router start up, or the router is
	Amber	malfunctioning.

	Flashing	The fan has failed.

	Off	Normal operation.

Full Dup	Green	The port is operating at full-duplex.

	Off	The port is operating at half-duplex.

Link/ACT	Green	A link has been established.

	Flashing	Data is being transmitted.

	Off	No link is present.

100M	Green	The port is operating at 100Mbps.

	Off	The port is operating at 10Mbps.

613-000313 Rev C

Image 14

Contents Installation and Safety Guide AR400 Series Router Table of Contents Electrical Safety Statements Package Contents Models Covered By This GuideAR440S, AR441S and AR442S Package Contents AR450S Package ContentsAR450S Router Installing the AR450SBefore Installing the Router Selecting a SiteInstalling the Router in a Rack Applying Power to the RouterInitiate router start-up Configuring the AR450SUsing the CLI to configure the AR450S Save the configuration Log in and set the passwordConfigure the router Access the CLI on the router Using the GUI to configure the AR450S Connect the PC to a router switch port Browse to the GUI Enable IPAssign an IP address to VLAN1 Connect to the LAN Connecting Data Cables to the AR450SConnecting the router to your network Connect to the DMZ portState Function System LEDs on the AR450SLED Installing the AR415S AR415S RouterInstalling an Optional PIC Installing the Router in a Rack Check the supply voltage and the router’s rated voltage Configuring the AR415S Using the GUI to configure the AR415SRouter Set PC to automatic IP addressLog Advanced configuration Using the CLI to configure the AR415SInstallation and Safety Guide Save the configuration At the log in prompt, enter the login name and password Connecting Data Cables to AR415S SYS System LEDs on AR415SPWR PICInstalling the AR440S, AR441S, AR442S AR440S, AR441S, AR442S RoutersInstalling an Optional PIC Installing the Router in a Rack Installing the Router on a Wall Applying Power to the Router Configuring the AR440S, AR441S, AR442S Using the GUI to configure the AR440S, AR441S and AR442SHub or Layer 2 Switch Installation and Safety Guide Set PC to automatic IP address Configure the router Using the CLI to configure the router Log in and set the password Connecting Data Cables to AR440S, AR441S, AR442S Shdsl System LEDs on AR440S, AR441S, AR442SAdsl Default Configuration on AR415S, AR440S, AR441S, AR442S Documentation and Tools CD-ROM Telecommunications Interfaces Important Safety InstructionsConnection to mains voltage supply TNV1 Connection to Isdn networkPorts for the connection of other apparatus TNV3Lightning Danger SafetyElectrical Notices Lightning Activity Electrical Type Class 1 EquipmentGefahr Durch Blitzschlag SicherheitAchtung Gefährliche Spannung VorsichtFare Under Uvejr SikkerhedElektriske Forholdsregler Lynaktivitet Elektrisk Klasse 1-UDSTYRGevaar Voor Blikseminslag VeiligheidWaarschuwingen MET Betrekking TOT Elektriciteit Elektrische Toestellen VAN KlasseAvertissement Danger D’ÉLECTROCUTION SécuritéInformation SUR LES Risques Électriques Équipement DE Classe 1 ÉlectriqueSalamaniskuvaara TurvallisuusSähköön Liittyviä Huomautuksia Pericolo DI Fulmini Norme di SicurezzaAvvertenze Elettriche Fare for Lynnedslag SikkerhetElektrisitet Elektrisk Type 1- Klasse UtstyrAtenção Perigo DE Choque Elétrico SegurançaAvisos Sobre Características Elétricas Perigo DE Choque Causado POR RaioPeligro DE Rayos SeguridadAvisos Electricos Temperatura Requerida Para LA OperaciónFara FÖR Blixtnedslag SäkerhetTillkännagivanden Beträffande Elektricitetsrisk Elektriskt TYP Klass 1 UtrustningFor the AR440S and AR442S routers For the AR021U PICRJ49C RJ11CCanadian Department of Communications Emission Compliance Statements Category Approval Agency and RequirementStandards The AR450S meets the following standards Nazareth Avenue Christchurch 8024 NEW Zealand EC Declaration of ConformityWe Allied Telesis Labs Limited