3Com WL-560 manual 3Com Corporation Campus Drive Marlborough MA USA

Page 2

3Com Corporation

350 Campus Drive

Marlborough

MA USA 01752-3064

Copyright © 2004, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Novell and NetWare are registered trademarks of Novell, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd.

IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Inc.

All other company and product names may be trademarks of the respective companies with which they are associated.

ENVIRONMENTAL STATEMENT

It is the policy of 3Com Corporation to be environmentally-friendly in all operations. To uphold our policy, we are committed to:

Establishing environmental performance standards that comply with national legislation and regulations.

Conserving energy, materials and natural resources in all operations.

Reducing the waste generated by all operations. Ensuring that all waste conforms to recognized environmental standards. Maximizing the recyclable and reusable content of all products.

Ensuring that all products can be recycled, reused and disposed of safely.

Ensuring that all products are labelled according to recognized environmental standards.

Improving our environmental record on a continual basis.

End of Life Statement

3Com processes allow for the recovery, reclamation and safe disposal of all end-of-life electronic components.

Regulated Materials Statement

3Com products do not contain any hazardous or ozone-depleting material.

Environmental Statement about the Documentation

The documentation for this product is printed on paper that comes from sustainable, managed forests; it is fully biodegradable and recyclable, and is completely chlorine-free. The varnish is environmentally-friendly, and the inks are vegetable-based with a low heavy-metal content.

Image 2
Contents 3Com 11a/b/g Wireless Workgroup Bridge User Guide 3Com Corporation Campus Drive Marlborough MA USA Contents Configuring the Bridge END User License Agreement Regulatory Information Page About this Guide Documentation ConventionsRelated FollowingDocumentation documentation Product Registration Support Introduction 802.11a 802.11gNetwork ConfigurationNetwork Configuration and Planning PlanningExample ConfigurationsWireless Infrastructure Network Workgroup Ad-Hoc NetworkUnpacking BridgeBridge Deciding Where to Place the Bridge Wall-Mounting the BridgeRouting Cable Under the Cradle Securing the Locking Bar Connecting Connecting the PowerAbout the Client List Connecting to a Hub Connecting the BridgeNetwork printers in areas that are not wired for Ethernet Indicators LEDExternal Antenna Need to ConfigureAttaching An Determining if youDetermining if you Need to Configure the Bridge Networks without a Dhcp ServerBridge Default Settings To Wireless Client InfrastructureUsing the 3Com Installation CD Using the 3Com Installation CDInstalling the Bridge Configuring the Bridge Infrastructure Using the 3ComWireless Device ManagerClick Configure Using the 3Com Wireless Infrastructure Device ManagerButton Description System UsingManagement Clearing Applying System Configuration Settings Moving to a new configurationSystem Properties Server, select Obtain an IP address automatically and click ApplySelect Wireless Client Infrastructure to associate with an Select 802.11a to set the Bridge to operate with eitherService Area Select Specify the Wireless LAN Service Area to allowExternal and one internal antenna this setting Being used, click Long Wi-Fi InteroperableSet the Data Preamble No Security Open System 40/64-bit Shared Key WEP104/128-bit Shared Key 128/152-bit Shared KeyOr Disable AESSecondary Radius Using the Configuration Management System Configuring Operation Mode About UartConfiguring Uart Settings Configuring Network Serial Port SettingsApplying Settings ResetUnder Tools, click Restore Factory Defaults Or with the Bridge out of the cradleUsing FTP default Using TftpUsing Http Under Tools, click Backup Wireless Workgroup BridgeUnder Tools, click Restore Wireless Workgroup Bridge Summary Page Problems DiagnosingTroubleshooting Uninstall 3Com Wireless Infrastructure Device Manager DisconnectingUninstalling Disconnecting the BridgeUpgrading Bridge FirmwareRegister Your Service BenefitsSolve Problems Product to GainAccess Software WarrantyProfessional Services Purchase ExtendedDirectory of 3Com resources by region at Contact UsLatin America Telephone Technical Support and Repair END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Industry Canada IC Emissions Compliance Statement Europe EU Declaration of Conformity Bipt Indoor/Outdoor