3Com WL-560 manual Using Http, Under Tools, click Backup Wireless Workgroup Bridge

Page 51

Using the Configuration Management System 45

Using HTTP

The general instructions for installing the upgrade using HTTP are:

1Launch the Configuration Management System.

2Under Tools, click Upgrade System.

3Select HTTP.

4Click Browse to locate the downloaded firmware file.

5Click Upgrade to start the upgrade process.

The upgrade takes place through the HTTP protocol from the local computer.

Changing the 3Com recommends that you set a password to protect against Administration Login unauthorized access. After you set the password, you must enter it each Name and Password time you launch the configuration for the device.

Under Tools, click Change Administration Password. The Change Administration Password page appears, where you can change the login name and administration password for the device. Enter the current password and new password in the spaces provided and click Save.

Backing up a As part of system maintenance, you should save and back up the Configuration configurations of individual Bridges in case you need to reload them in

the future. The backup saves all the parameters of the selected Bridge in a file on your computer. The file can be used later to restore the configuration on this or another bridge.

1Set the Bridge parameters in the System Configuration pages.

2Under Tools, click Backup Wireless Workgroup Bridge.

3In the next page, click Backup Now.

4Specify a name and location for the backup, and click OK.

Image 51

Contents 3Com 11a/b/g Wireless Workgroup Bridge User Guide 3Com Corporation Campus Drive Marlborough MA USA Contents Configuring the Bridge END User License Agreement Regulatory Information Page About this Guide Following ConventionsRelated DocumentationDocumentation documentation Product Registration Support Introduction 802.11g 802.11aPlanning ConfigurationNetwork Configuration and Planning NetworkWorkgroup Ad-Hoc Network ConfigurationsWireless Infrastructure Network ExampleBridge UnpackingBridge Wall-Mounting the Bridge Deciding Where to Place the BridgeRouting Cable Under the Cradle Securing the Locking Bar Connecting the Power ConnectingConnecting the Bridge About the Client List Connecting to a HubNetwork printers in areas that are not wired for Ethernet LED IndicatorsDetermining if you Need to ConfigureAttaching An External AntennaNetworks without a Dhcp Server Determining if you Need to Configure the BridgeTo Wireless Client Infrastructure Bridge Default SettingsUsing the 3Com Installation CD Using the 3Com Installation CDInstalling the Bridge Configuring the Bridge Device Manager Using the 3ComWireless InfrastructureUsing the 3Com Wireless Infrastructure Device Manager Click ConfigureButton Description Using ManagementSystem Moving to a new configuration Clearing Applying System Configuration SettingsSystem Properties Apply Server, select Obtain an IP address automatically and clickSelect 802.11a to set the Bridge to operate with either Select Wireless Client Infrastructure to associate with anSelect Specify the Wireless LAN Service Area to allow Service AreaBeing used, click Long Wi-Fi Interoperable External and one internal antenna this settingSet the Data Preamble 40/64-bit Shared Key WEP No Security Open System128/152-bit Shared Key 104/128-bit Shared KeyAES Or DisableSecondary Radius Using the Configuration Management System About Uart Configuring Operation ModeConfiguring Network Serial Port Settings Configuring Uart SettingsReset Applying SettingsOr with the Bridge out of the cradle Under Tools, click Restore Factory DefaultsUsing Tftp Using FTP defaultUnder Tools, click Backup Wireless Workgroup Bridge Using HttpUnder Tools, click Restore Wireless Workgroup Bridge Summary Page Diagnosing ProblemsTroubleshooting Disconnecting the Bridge DisconnectingUninstalling Uninstall 3Com Wireless Infrastructure Device ManagerFirmware Upgrading BridgeProduct to Gain Service BenefitsSolve Problems Register YourPurchase Extended WarrantyProfessional Services Access SoftwareContact Us Directory of 3Com resources by region atLatin America Telephone Technical Support and Repair END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Industry Canada IC Emissions Compliance Statement Europe EU Declaration of Conformity Bipt Indoor/Outdoor