3Com WL-560 manual Summary

Using the Configuration Management System 47

Viewing Connection Under System Summary, click Connection Status to view a summary of the Status Bridge’s current connection information. See Table 8 on page 27 for details.

Viewing System Under System Summary, you can view the following information:

Summary

Table 14 System Summary Page

Property	Description	Default Value
Device Name	The name assigned to the Bridge. You can	3Com WWB
	change the default name to one of your
	choice by clicking System Properties under
	System Configuration.
Device Location	If you use the default device name, entering	None
	the location is optional.
Country Code	The Country Code determines the available	Varies
	channels and transmission power level
	based on regulatory restrictions in the
	county where the Bridge is installed.
Transmit Power	The level of transmission power (100%,	100%
	50%, 25%, 12%, or Min).
	You can change this setting by clicking
	Wireless Network under System Configuration.
MAC Address	The MAC address of the Bridge.	N/A
Serial Number	The serial number of the Bridge.	N/A
Firmware Version	The version of firmware the Bridge is	N/A
	currently using.
DHCP Client	Determines if the Bridge obtains its	On
	IP address from the DHCP server on the
	network.
IP Address	The IP address of the Bridge. You can	Varies
	change this address by clicking IP Network
	under System Configuration.
Subnet Mask	The subnet mask address of the Bridge.	Varies
	You can change this address by clicking IP
	Network under System Configuration.
Data Preamble	The data preamble setting (Short [Enhanced	Long
	performance] or Long [Wi-Fi Interoperable]).
	To change this setting, click Wireless
	Network under System Configuration.
System Up Time	The elapsed time since the Bridge booted up.	Day 0, 0:00:00
Date Manufactured	The date the Bridge was manufactured.	N/A

Click Refresh to update the information.