Radio Shack 20-426 manual To Do This

Page 7

Contents

STATE — selects the state code.

PVT/HWY/POL— Scans the private scan bank; scans the private scan bank and highway frequencies (or local police) when pressed in highway scanning mode. Also, used with FUNC + HWY/POL.

SRCH/SVC — selects the search band. Starts ID search mode. Also, used with FUNC + SVC.

TRUNK — Turns on trunk tracking.

FUNC— Lets you use various functions by pressing this key in combination with other keys. Press and release FUNC. Then press the next key.

0-9/WX ALT — enter

numbers for various functions. For weather alert, press FUNC +1.

For M-LOCK, press

FUNC + 9.

./CLR/ — enter a

decimal point or clear

an incorrect entry.

Also, used with FUNC

+ .

E/PGM — store the

frequency. Also, used

with FUNC + PGM.

Press These Buttons

To Do This

FUNC + SVC

Toggle service scan.

 

 

FUNC + PGM

Program frequencies into channels.

 

 

FUNC + M-LOCK

Lock or unlock the memory.

 

 

FUNC +

Jump directly to the last channel in memory

(Ch1000) from any mode.

 

 

 

FUNC + WX ALT

Turn the WX alert function on or off.

 

 

FUNC +

Switch between the three signal stalker modes.

 

 

 

FUNC + HWY/POL

Scan highway frequencies. Scan highway

 

frequencies and local police bank in highway

 

mode.

 

 

 

 

7

Image 7
Contents Pro-2051 1,000-Channel Triple Trunking Mobile/Base Scanner Contents Basics Power your scannerSet up your scanner BasicsHighway patrol alerts Advanced scanner featuresBeyond the Basics Scanning a private bankWarranty Contents SkywarnSignal Stalker Wired programmingHOLD/RESUME Your scanner’s keypadTo Do This Your scanner’s rear view Trunk Your scanner’s displayFCC wants you to know Mounting the scanner in your vehicle Install your scannerFrom a wall outlet Power your scannerThrough your vehicle’s ignition negative ground only Rear View From your vehicle’s cigarrette lighterConnecting an external antenna Connecting the supplied antennaConnect your scanner Use extreme caution when installing or removing an Connecting an external speakerListening Safely Turn on your scanner Set up your scannerSet the squelch Common scanner terms Basics Listen to preprogrammed frequenciesScanning overview Basics Storing known frequencies into channels Advanced scanner featuresBeyond the Basics Channel storage banksBeyond the Basics Locking out channels Locking out a channel in hold modeLocking out a channel in scanning mode Beyond the Basics Deleting a stored frequencyMemory lock Restoring a locked-out channel in hold modeRestoring all locked-out channels Beyond the Basics Hold/resume Direct channel accessScanning a private bank Changing the priority channel Beyond the Basics Priority scanService scanning Beyond the Basics Band search Setting a search bandSearch hold Data skipStoring search frequencies Beyond the Basics Frequency skipDelay Highway patrol/local police scanning Highway patrol alertsSelecting the state State Code Order Press these buttons Action Beyond the Basics Scan hold Setting the alert tone volumeHighway warning alert Skip frequencies Adjusting alertHighway patrol priority channels Muting the alert toneTrunked highway frequencies About Skywarn SkywarnNWR Same Programming Fips Programming a Fips codeBeyond the Basics Signal Stalker Setting the signal stalker options Beyond the Basics Using signal stalker Trunk tracking Setting the squelchProgramming trunking frequencies Selecting Trunking System Type Programming id scan lists manually Edacs talk groups Motorola talk groupsReceiving trunked systems LTR talk groupsID scan hold mode ID scan modeID search mode Direct entry id hold modeID search hold mode Programming scan lists during search ID monitor modeDeleting a stored ID Reviewing ID lockout ID lockoutRestoring locked-out IDs Setting priority in trunking mode Setting the delay mode for trunking modeTrunking frequency confirmation Multi-track Moving between scan list memoriesAbout multi-track Programming Edacs system frequencies Edacs trackingBeyond the Basics An Edacs trunked system Special Edacs featuresAFS partial entry Edacs ID blockout Edacs ID range searchEdacs Scat Tracking LTR systemsBeyond the Basics Tracking Motorola systems fleet map programming Preset Fleet Maps E1P1 E1P5 E1P11 User-defined fleet maps Selecting a Preset Fleet MapFleet Map Size Codes Programming a user fleet map Size code restrictionsProgramming a Hybrid system You can only enter within a range of 5-100 kHz, and 5 or Toggling the status bit Control channel only mode Disconnect tone detect option end code If the scanner receives no data from the PC for more than Cloning your scanner Birdies Replacing the fuse in the DC power cordProperly Beyond the Basics Resetting your scannerDrive by patrol cars but do not hear alarms? Frequently asked questions FAQsError appears on the display. What does it mean? If Frequencies SpecificationsGlossary Care Service and repair