Radio Shack 20-426 manual Size code restrictions, Programming a user ﬂeet map

Page 70

Beyond the Basics

13	1	16	2048	4

14	1	16	4096	8

size code restrictions

If you select size code 12, 13, or 14, there are some restrictions as to which blocks can be used for these codes.

•Size code 12 can only be assigned to blocks 0, 2, 4, or 6.

•Size code 13 can only be assigned to blocks 0 and 4.

•Size code 14 can only be assigned to block 0.

Since these size codes require multiple blocks, you will be prompted for the next available block when programming a ﬂeet map. For example, if you assign block 0 as size code 12, you will be prompted for block 2, the next block available, instead of block 1. And if you assign block 0 as size code 14, you would not see another prompt because all available blocks have been used.

programming a user ﬂeet map

1.Select the trunking programming mode and the bank you want to change.

2.Press e or d to select E1, then press E.

3.Press e or d to select FLEEt, then press E.

4.Press e or d to select USr, then press E.

5.Press e or d to select the size code for the ﬁrst block, then press E. The next available block appears on the display. Then, repeat this step until you have selected a size code for each block.

programming a Hybrid system

A Hybrid system is simply a Type I system with some blocks designated as Type II blocks. To program a Hybrid system,

70

Image 70

Contents Pro-2051 1,000-Channel Triple Trunking Mobile/Base Scanner Contents Basics Power your scannerSet up your scanner BasicsScanning a private bank Advanced scanner featuresBeyond the Basics Highway patrol alertsWired programming Contents SkywarnSignal Stalker WarrantyYour scanner’s keypad HOLD/RESUMETo Do This Your scanner’s rear view Your scanner’s display TrunkFCC wants you to know Install your scanner Mounting the scanner in your vehicleFrom a wall outlet Power your scannerThrough your vehicle’s ignition negative ground only From your vehicle’s cigarrette lighter Rear ViewConnecting an external antenna Connecting the supplied antennaConnect your scanner Connecting an external speaker Use extreme caution when installing or removing anListening Safely Turn on your scanner Set up your scannerSet the squelch Common scanner terms Basics Listen to preprogrammed frequenciesScanning overview Basics Channel storage banks Advanced scanner featuresBeyond the Basics Storing known frequencies into channelsBeyond the Basics Beyond the Basics Deleting a stored frequency Locking out a channel in hold modeLocking out a channel in scanning mode Locking out channelsMemory lock Restoring a locked-out channel in hold modeRestoring all locked-out channels Direct channel access Beyond the Basics Hold/resumeScanning a private bank Beyond the Basics Priority scan Changing the priority channelService scanning Setting a search band Beyond the Basics Band searchData skip Search holdBeyond the Basics Frequency skip Storing search frequenciesDelay Highway patrol/local police scanning Highway patrol alertsSelecting the state State Code Order Press these buttons Action Beyond the Basics Scan hold Setting the alert tone volumeHighway warning alert Muting the alert tone Adjusting alertHighway patrol priority channels Skip frequenciesTrunked highway frequencies Skywarn About SkywarnNWR Same Programming a Fips code Programming FipsBeyond the Basics Signal Stalker Setting the signal stalker options Beyond the Basics Using signal stalker Setting the squelch Trunk trackingProgramming trunking frequencies Selecting Trunking System Type Programming id scan lists manually Motorola talk groups Edacs talk groupsLTR talk groups Receiving trunked systemsID scan mode ID scan hold modeID search mode Direct entry id hold modeID search hold mode Programming scan lists during search ID monitor modeDeleting a stored ID Reviewing ID lockout ID lockoutRestoring locked-out IDs Setting priority in trunking mode Setting the delay mode for trunking modeTrunking frequency conﬁrmation Moving between scan list memories Multi-trackAbout multi-track Edacs tracking Programming Edacs system frequenciesBeyond the Basics An Edacs trunked system Special Edacs featuresAFS partial entry Edacs ID range search Edacs ID blockoutTracking LTR systems Edacs ScatBeyond the Basics Tracking Motorola systems ﬂeet map programming Preset Fleet Maps E1P1 E1P5 E1P11 Selecting a Preset Fleet Map User-deﬁned ﬂeet mapsFleet Map Size Codes Programming a user ﬂeet map Size code restrictionsProgramming a Hybrid system You can only enter within a range of 5-100 kHz, and 5 or Toggling the status bit Control channel only mode Disconnect tone detect option end code If the scanner receives no data from the PC for more than Cloning your scanner Replacing the fuse in the DC power cord BirdiesBeyond the Basics Resetting your scanner ProperlyFrequently asked questions FAQs Drive by patrol cars but do not hear alarms?Error appears on the display. What does it mean? Speciﬁcations If FrequenciesGlossary Service and repair Care